Improvements in Multifunctional Properties of Epoxy/TiO2 Composites and Coatings

2019-05-26
Çaldıklıoğlu, Almira
Bayram, Göknur
Yılmazer, Ülkü
Show full item record
55
views
0
downloads
https://hdl.handle.net/11511/79821
35th INTERNATIONAL CONFERENCE of THE POLYMER PROCESSING SOCIETY (PPS-35), 26 - 30 May 2019
Unverified, Conference / Seminar

Suggestions

Improvement in mechanical, electrical, and shape memory properties of the polystyrene-based carbon fiber-reinforced polymer composites containing carbon nanotubes
Erkmen, Berrak; Bayram, Göknur (2021-02-01)
Carbon fiber-reinforced polymers based on polystyrene matrix containing elastomer and carbon nanotubes (CNTs) were produced by compression molding. The effects of carbon fabric (CF) concentration and silane treatment on the morphology, mechanical, electrical, and shape memory properties of the multilayer composites were investigated. The SEM analyses showed that fibers of the silane-treated CFs were more homogeneously covered with the polymer layers than the untreated CFs. The tensile strength and modulus o...
Improvements in microstructural, mechanical, and biocompatibility properties of nano-sized hydroxyapatites doped with yttrium and fluoride
BAŞAR, Burcin; Tezcaner, Ayşen; Keskin, Dilek; Evis, Zafer (Elsevier BV, 2010-07-01)
Hydroxyapatite was doped with Y3+ (2.5, 5 and 7.5 mol%) and F (2.5 mol%) ions (2.5YFHA, 5YFHA, 7.5YFHA, respectively) to compare its structural and mechanical properties and cellular response with pure-hydroxyapatite. No second phases were observed by X-ray diffraction spectra of 2.5YFHA. Doped hydroxyapatites had F- bonds in addition to OH- bonds. Hydroxyapatites sintered at 900 and 1100 degrees C were in nano-size. 7.5YFHA sintered at 1300 degrees C had the highest microhardness value. 2.5YFHA sintered at...
Improvements in adhesion properties of solid propellant rocket liner
Özten, F. Burcu; Üner, Deniz Özbay; Özkar, Saim; Department of Chemical Engineering (1998)
Improvement in sinterability and phase stability of hydroxyapatite and partially stabilized zirconia composites
Evis, Zafer; KUTBAY, IŞIL (Elsevier BV, 2009-03-01)
Composites of hydroxyapatite with partially stabilized zirconia with MgO or MgF2 were pressureless sintered between 1000 degrees C and 1300 degrees C. The reactions and transformations of phases were verified by X-ray diffraction. For the hydroxyapatite and zirconia composites with MgO, calcium from the hydroxyapatite diffused into the zirconia phase, and the hydroxyapatite decomposed to tri-calcium phosphate at sintering temperatures higher than 1000 degrees C. Above about 1200 degrees C, CaZrO3 was formed...
Improvements on combustion properties of asphaltite and correlation of activation energies with combustion results
Hicyilmaz, C; Altun, Naci Emre (Elsevier BV, 2006-06-01)
Processing of Sirnak Asphaltite sample by gravity and flotation concentration methods was investigated to decrease its ash content. Finely disseminated inorganic constituents of asphaltite revealed the difficulty of operation. Ash content of asphaltite was reduced from 44.86% to 31.44% by gravity concentration method with a 75% combustible recovery. On the other hand, it was possible to reduce ash content to 24% by flotation with almost same combustible recovery. Combustion characterization of raw and impro...
Citation Formats
A. Çaldıklıoğlu, G. Bayram, and Ü. Yılmazer, “Improvements in Multifunctional Properties of Epoxy/TiO2 Composites and Coatings,” presented at the 35th INTERNATIONAL CONFERENCE of THE POLYMER PROCESSING SOCIETY (PPS-35), 26 - 30 May 2019, İzmir, Turkey, 2019, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/79821.
METU IIS - Integrated Information Service open@metu.edu.tr