A design rule for prediction of the just suspended speed of mixed slurries

Date

2011-10-16

Author

Ayrancı Tansık, İnci
Garcia, Maria
Etchells, Arthur Iıı
Kresta, Suzanne

Metadata

Show full item record

Item Usage Stats

37
views

0
downloads

URI

https://hdl.handle.net/11511/80553
https://www.aiche.org/conferences/aiche-annual-meeting/2011/proceeding/paper/36f-design-rule-prediction-just-suspended-speed-mixed-slurries

Collections

Department of Chemical Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

A GENERALIZED DESIGN METHOD FOR DIRECTIVITY PATTERNS OF SPHERICAL MICROPHONE ARRAYS De Sena, Enzo; Hacıhabiboğlu, Hüseyin; Cvetkovic, Zoran (2011-05-27) Spherical microphone arrays provide a flexible solution to obtaining higher-order directivity patterns, which are useful in audio recording and reproduction. A general systematic approach to the design of directivity patterns for spherical microphone arrays is introduced in this paper. The directivity patterns are obtained by optimizing a cost function which is a convex combination of a front-back energy ratio and a smoothness term. Most of the standard directivity patterns - i.e. omnidirectional, cardioid,...
A control algorithm to minimize torque ripple and acoustic noise of switched reluctance motors Bizkevelci, Erdal; Ertan, Hulusi Bülent; Department of Electrical and Electronics Engineering (2008) Despite its simple construction, robustness and low manufacturing cost, the application areas of SR motors are remained limited due to the high level of acoustic noise and torque ripple. In this thesis work, two different type of controllers are designed and implemented in order to minimize the acoustic noise and torque ripple which are considered as the major problems of SR motors. In this scope, first the possible acoustic noise sources are investigated. A sliding mode controller is designed and implement...
A Formulation for Scanning Soil-water Characteristic Curves Kenanoğlu, Melih Birhan; Toker, Nabi Kartal (2018-10-01) The hysteretic nature of soil water characteristic curve (SWCC) is captured assuming the virgin drying and virgin wetting (a.k.a. imbibition) curves; which can be obtained from experiments or various fitting equations in the literature, bound all possible values during transition from one regime to the other. The scanning curves (transitions between virgin wetting and drying SWCC) are modelled by using geometry-based relations, which are devised by means of the observations on the shapes of graphs of experi...
A double sampling scheme for esimating from dependent binary data Ünal, Cemal; Erdem, İsmail; Department of Statistics (1990)
A methodology for lining design of circular mine shafts in different rock masses Öztürk, Hasan (2016-09-01) In this study, the finite element numerical modelling of 2D shaft sections in a Hoek-Brown medium are carried out in a non-hydrostatic stress state in an attempt to predict pressures developing around mine shafts. An iterative process of applying support pressure until observing no failure zone around the shaft is used to simulate the required lining support pressure for different shaft models. Later, regression analysis is carried out to find a generic shaft pressure equation representing the rock mass and...

Citation Formats

İ. Ayrancı Tansık, M. Garcia, A. I. Etchells, and S. Kresta, “A design rule for prediction of the just suspended speed of mixed slurries,” 2011, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/80553.