Flotation of Pyrite from Flotation Tailings

2018-10-26
Altınsel, Yiğit
Sarılar, Sena
Yılmaz, Orhan
Atalay, Mustafa Ümit
Altun, Naci Emre
Show full item record
175
views
0
downloads
https://hdl.handle.net/11511/80780
The 2017 world congress on advanced in structural engineering and mechanics, 28 Ağustos - 01 Eylül 2017
Unverified, Conference / Seminar

Suggestions

Condensation of steam on multiple horizontal tubes
Makas, Aytaç; Yamalı, Cemil; Department of Mechanical Engineering (2004)
The problem of condensation of steam on a vertical tier of horizontal tubes is investigated by both analytical and experimental methods in this study. A computer program is written to perform the analysis of laminar film condensation on the horizontal tubes. The program is capable to calculate condensate film thickness and velocity distribution, as well as the heat transfer coefficient within the condensate. An experimental setup was also manufactured to observe the condensation phenomenon. Effects of tube ...
Scour and scour protection at bridge abutments
Kayatürk, Şerife Yurdagül; Göğüş, Mustafa; Department of Civil Engineering (2005)
Bridge failures are mainly caused by scouring the bed material around bridge foundations during flood. In this study, scour phenomenon around bridge abutments is experimentally studied. Effect of abutment size, location and size of the collars placed around the abutments, time evaluation of scour hole around the abutment, scour characteristics of abutment and pier interaction were experimentally investigated. Scour measurements were conducted in a rectangular channel of 30 m long and 1.5 m wide filled with ...
Capacitated Multi-Stage Maintenance and Manufacturing Systems
Avşar, Zeynep Müge (2001-04-24)
Optimum characteristic properties of isolators with bilinear force-displacement hysteresis for seismic protection of bridges built on various site soils
Dicleli, Murat (Elsevier BV, 2011-07-01)
In this study, closed form equations as functions of the isolator, bridge and ground motion properties are formulated to calculate the optimum characteristic strength, Q(d) and post-elastic stiffness, k(d), of the isolator to minimize the maximum isolator displacement (MID) and force (MIF) for seismic isolated bridges (SIBS). For this purpose, first, sensitivity analyses are conducted to identify the bridge, isolator and ground motion parameters that affect the optimum values of Q(d) and k(d). Next, for the...
Optimum design of parallel, horizontal and laminar forced convection air-cooled rectangular channels with insulated lateral surfaces
Özdemir, Mehmet Ozan; Yüncü, Hafit; Department of Mechanical Engineering (2009)
The objective of this thesis is to predict numerically the optimal spacing between parallel heat generating boards. The isothermal boards are stacked in a fixed volume of electronic package enclosed by insulated lateral walls, and they are cooled by laminar forced convection of air with prescribed pressure drop. Fixed pressure drop assumption is an acceptable model for installations in which several parallel boards in electronic equipment receive the coolant from the same source such as a fan. In the numeri...
Citation Formats
Y. Altınsel, S. Sarılar, O. Yılmaz, M. Ü. Atalay, and N. E. Altun, “Flotation of Pyrite from Flotation Tailings,” presented at the The 2017 world congress on advanced in structural engineering and mechanics, 28 Ağustos - 01 Eylül 2017, 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/80780.
METU IIS - Integrated Information Service open@metu.edu.tr