Sürdürülebilirlik ve Seramik Çağı

2018-10-03
Bu çalışma; seramik alanındaki gelişimi: dünü, bugünü ve geleceğin vizyonunu özetlerken; “Seramik malzeme” kavramının zaman içinde değişimini inceleyecektir. Geleneksel kil bazlı malzemelerden yeni yüksek teknoloji ürünlere ulaşım serüveni ve sistemleri irdelemektedir. Seramik malzemenin; yüksek performanslı kapasitörler, süper-iletkenler, yüksek verimli oksitler, karbürler ve nitritleri içerecek kadar değiştiğine vurgu yaparken; yeni malzemelerin araştırılması, işlemlerinin ve karakterizasyonlarının teknik açıdan daha geniş bir veri tabanı sahip olduğunu göstermektedir. Bu çerçevede seçilen 2 örnek: endüstriyel seramik uygulama üretimi ve potansiyel gelecekleri tartışılacaktır. Seramik araştırmalarının ve uygulama alanlarındaki önemli değişim, bu alandaki araştırmalar ve bu çalışmada seramik biliminde ortaya çıkan yeni potansiyeller irdelenecektir.
SSEDD 5. Seramik Sanatı Eğitimi Konferansı

Suggestions

The Coastal circulation model of Büyük Menderes river mouth and adjacent coastal areas
Gözlet, Mehmet Sedat; Özyurt Tarakcıoğlu, Gülizar; Baykal, Cüneyt; Department of Civil Engineering (2019)
In this study; coastal circulation of Buyuk Menders river mouth and the adjacent coastal areas is modeled to determine the current characteristics of the region under river-sea interaction. For this purpose, Finite Volume Coastal Ocean Model (FVCOM) numerical model is setup and run under wind, tide, and river forcing conditions. Current, salinity, temperature data from field measurements are used to validate the performance of the model setup with default parametrization. Significance of each forcing on the...
Gas production from hydrate resevoirs
Alp, Doruk; Parlaktuma, Mahmut; Department of Petroleum and Natural Gas Engineering (2005)
In this study; gas production by depressurization method from a hydrate reservoir containing free gas zone below the hydrate zone is numerically modeled through 3 dimensional, 3 phase, non-isothermal reservoir simulation. The endothermic nature of hydrate decomposition requires modeling to be non-isothermal; hence energy balance equations must be employed in the simulation process. TOUGH-Fx, the successor of the well known multipurpose reservoir simulator TOUGH2 (Pruess [24]) and its very first module TOUGH...
Investigation of turbulence models used in automotive industry
Taştan, Umur; Çetinkaya, Tahsin Ali; Department of Mechanical Engineering (2011)
In this study; reliability and performance of turbulence models used in CFD softwares to determine the aerodynamics of passenger cars, are tested and compared. In the analyses, drag forces acting on the car, pressure and velocity distributions and wake flow patterns are determined by using several turbulence models with a commercial software Fluent. Calculated results compared to the experimental results given in the literature. It is observed that, turbulence models give relatively reliable results for det...
Substituted quinoxaline and benzimidazole containing monomers as long wavelength photosensitizers for diaryliodonium salt initiators in photopolymerization
Çorakçı, Bengisu; Toppare, Levent Kamil; Çırpan, Ali; Department of Chemistry (2013)
In this study; ferrocenyl and naphthalenyl substituted quinoxaline derivatives; 5,8- bis (2,3- dihydrothieno [3,4-b] [1,4] dioxin-5-yl)-2- (naphthalen-2-yl)- 3- ferrocenyl- 4a,8a-dihydroquinoxaline; 5,8- bis (2,3-dihydrothieno [3,4-b] [1,4]dioxin-5-yl) -2- (phenyl) -3-ferrocenylquinoxaline; 5,8-bis (2,3-dihydrothieno [3,4-b] [1,4]dioxin-5-yl) -2,3- di(naphthalen-2-yl)quinoxaline and trihexylthiophene and thiophene coupled benzimidazole derivatives; 4-(tert-butyl)-4,7-bis(4-hexylthiophen-2-yl)spiro[benzo[d]i...
Diffusion of sustainable production approach into Turkish manufacturing industry : pilot applications and sectoral assessments
Alkaya, Emrah; Demirer, Göksel Niyazi; Department of Environmental Engineering (2013)
The main aim of this study was (i) to investigate the applicability of various sustainable production measures in different industrial sectors and (ii) to conduct a sectoral assessment study for a selected sector in order to contribute to the diffusion of sustainable production approach into Turkish manufacturing industry. As a result of the environmental performance evaluations, objectives were set for six companies from six different sectors in order to decrease the negative environmental impacts and prod...
Citation Formats
H. Gürsu, “Sürdürülebilirlik ve Seramik Çağı,” presented at the SSEDD 5. Seramik Sanatı Eğitimi Konferansı, Antalya, Türkiye, 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/80875.