Use of chitosan and chitosan immobilized silicate for sorption and preconcentration of Arsenic (V)

Date

2007-08-23

Author

Boyacı, Ezel

Metadata

Show full item record

Item Usage Stats

33
views

0
downloads

URI

https://hdl.handle.net/11511/81491

Collections

Unverified, Article

Suggestions

OpenMETU
Core

Use of clinoptilolite for copper and nickel removel from aqueous solutions Çağın, Volkan; İmamoğlu, İpek; Department of Environmental Engineering (2006) Heavy metals are well known toxic priority pollutants. Hence, wastewaters containing these species must be treated prior to discharge into receiving bodies. In this study, the potential of Bigadiç clinoptilolite for Cu2+ and Ni2+ removal from wastewaters was investigated in batch and continuous reactors. Results of the preliminary experiments revealed the optimum operating conditions, namely, initial solution pH of 5 and 4 for Cu2+ and Ni2+, respectively and contact time of 48 hours. Additionally, condition...
Use of boron oxide and boric acid to improve flame retardancy of an organophosphorus compound in neat and fiber reinforced polyamide-6 POLAT, Osman; Kaynak, Cevdet (2016-09-01) The aim of this study was to investigate the usability of boron oxide and boric acid to enhance flame retardancy of (aluminum diethyl phosphinate)-type organophosphorus compound in polyamide-6 and its 15 wt% of short (glass fiber)-reinforced composite. Materials were compounded by melt-mixing method via a twin-screw extruder, and the specimens for testing and analyses were shaped by injection and compression-molding. For the neat polyamide-6 specimens, mass loss cone calorimetry analyses indicated that repl...
Use of maleic anhydride compatibilization to improve toughness and other properties of polylactide blended with thermoplastic elastomers Kaynak, Cevdet (2014-12-01) Polylactide (PLA) being a very brittle biopolymer could be toughened by blending with thermoplastic elastomers such as thermoplastic polyurethane elastomer (TPU) and thermoplastic polyester elastomer (TPE); unfortunately, these blends are immiscible forming round domains in the PLA matrix. Therefore, the purpose of this study was to investigate the effects of using maleic anhydride (MA) compatibilization on the toughness and other properties of PLA blended with TPU and TPE. MA grafting on the PLA backbone (...
Use of Triton X - 114 aqueous two phase system for recovery of mushroom (Agaricus bisporus) polyphenoloxidase Beşel, Elif; Bakır, Ufuk; Department of Chemical Engineering (2003) Mushroom (Agaricus bisporus) polyphenoloxidase (PPO) (EC 1.14.18.1) was isolated and purified using an aqueous two phase system composed of octyl phenol (ethyleneglycol) 7-8 ether (Triton X-114/TX-114). TX-114 is a non-ionic surfactant which thermoseparates in water and forms an aqueous two phase system with a surfactant-depleted top phase and a surfactant-enriched bottom phase. Critical micelle concentration (CMC) and cloud point of the surfactant are 0.17 mM and 22ðC respectively. The partitioning behavio...
Use of perlite as a pozzolanic addition in producing blended cements Erdem, Tahir Kemal; Akgül, Çağla; Tokyay, Mustafa; Erdogan, Turhan Y (2007-01-01) There are similar to 6700 million tons of perlite reserves in the world and two thirds of this amount takes place in Turkey. Although perlite possesses pozzolanic properties, it has not been so far used in producing blended cements. This study focuses on the use of natural perlites in blended cement production. For this purpose, after examining the suitability of the perlites as pozzolans and their case of grindability, 16 types of blended cements having 320 m(2)/kg or 370 m(2)/kg Blaine fineness were produ...

Citation Formats

E. Boyacı, “Use of chitosan and chitosan immobilized silicate for sorption and preconcentration of Arsenic (V),” 2007, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/81491.