Realization of a Vivaldi antenna using an unbalanced slotline structure

Download
1989
Batum, A. Tunç

Suggestions

Realization of transmitter and receiver clock generation units and channel switching unit in a modified analog radio relay
Büyüksemerci, Ayhan; Aşkar, Murat; Department of Electrical Engineering (1987)
Realization of a stripline switched multiplexer
Yıldız, İrfan; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (2001)
Realization of Single Layer Microbolometer Detector Pixel Using ZnO Material
Tanrikulu, M. Yusuf; Yildizak, Cigdem; Okyay, Ali K.; Akar, Orhan; Sarac, Adem; Akın, Tayfun (Institute of Electrical and Electronics Engineers (IEEE), 2020-09-01)
This paper presents the realization of a single layer microbolometer pixel fabricated using only ZnO material coated with atomic layer deposition. Due to the stress-free nature and high temperature coefficient of resistance of the ALD coated ZnO material, it can be used both as structural and active layers in microbolometer detectors. The design, simulations, and the fabrication optimization of two types of single layer ZnO microbolometer having pixel pitch of 35 mu m are shown in this study. The designed p...
Implementation of a PWM Regular Sampling Strategy for AC Drives
Richardson, Julian; Kukrer, Osman T. (1991-10-01)
The regular sampling technique offers a feasible basis for the microprocessor-control of inverters in pulsewidth modulated (PWM) ac drives. An implementation of this technique is presented for the speed control of an induction motor in the frequency range 5-105 Hz. Hardware and software design principles are outlined and discussed for an 8-bit microprocessor. Spectral analyses of the sampling technique with a sinusoidal modulating function and with a third harmonic added to this function are derived, with e...
Realization of Concentrated Photovoltaic Module Based on Horizontally Staggered Light Guide
Turan, Raşit (2018-06-01)
Concentrated photovoltaic (CPV) systems have proven to be an important alternative to conventional crystalline silicon and thin film photovoltaic (PV) energy conversion systems. In CPV systems, lenses or mirrors are used to collect sunlight from a large area and to focus it onto a small area of a high efficiency photovoltaic cell. In this paper, we report the realization of a new CPV concentrator that is based on a horizontally staggered light guide system with a medium concentration level. The optical comp...
Citation Formats
A. T. Batum, “Realization of a Vivaldi antenna using an unbalanced slotline structure,” Middle East Technical University, 1989.