# Mathematical Modeling of Liquid Steel Flow in Continuous Casting Machine

2012-04-18
IISS International Iron and Steel Symposium (16 - 18 Nisan 2012)

# Suggestions

 Mathematical modeling of adsorption/desorption systems for chemical heat pumps Yurtsever, Ahmet Onur; Uludağ, Yusuf; Karakaş, Gürkan; Department of Chemical Engineering (2011) Despite their limited commercial applications, chemical heat pumps (CHP) have been considered as an important alternative to conventional heating and cooling technologies. In this study, the adsorption-desorption of ethanol over activated carbon was applied on the CHP reactor. The ethanol vapor - activated carbon adsorption rate was determined at 30, 60, 90 and 120° experimentally by using Intelligent Gravimetric Analyzer C(IGA). The experimental adsorption data were used on the transient modeling of reacto...
 Mathematical modeling of wax deposition in crude oil pipeline systems Saraçoğlu, Önder Ramiz; Kök, Mustafa V.; Department of Petroleum and Natural Gas Engineering (1999)
 Mathematical modeling of thermal decomposition of coal Guruz, GA; Uctepe, U; Durusoy, T (Elsevier BV, 2004-06-01) Pyrolysis, as a first step in all thermochemical coal conversion processes, has been investigated in detail over the years in order to evaluate the kinetic data and to establish reliable models for the complex reaction scheme. Since coal pyrolysis is not a single reaction but rather a multiplicity in different time intervals for isothermal pyrolysis, or in different time and temperature intervals for the case of heat-up, any set of parameters cannot be expected to represent data accurately over a wide range...
 Mathematical Modelling of Wax Deposition in Crude Oil Pipeline Systems Kök, Mustafa Verşan; Saracoglu, Onder (2000-01-01) Deposition of wax on the wall of the crude oil pipelines is regarded as a problem since the pipeline diameter is reduced. Therefore more power is required to force the same amount of crude oil through the system. In this study, a mathematical model is developed for estimation of wax deposition in crude oil pipeline systems. A computer program was developed to simulate wax deposition phenomena. Each component is characterized by weight fraction, heat of fusion and melting point temperature. Temperature profi...
 Mathematical modeling of steam assisted gravity drainage Akın, Serhat (2004-06-22) A mathematical model for gravity drainage in heavy-oil reservoirs and tar sands during steam injection in linear geometry is proposed. The mathematical model is based on the experimental observations that the steam zone shape is an inverted triangle with the vertex fixed at the bottom production well. Both temperature and asphaltene content dependence of viscosity of the drained heavy oil is considered. The developed model has been validated using experimental data presented in the literature. The heavy oil...
Citation Formats
M. M. Yavuz, “Mathematical Modeling of Liquid Steel Flow in Continuous Casting Machine,” Karabük, Türkiye, 2012, vol. 1, p. 99, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/84675.