Performance of Mo2C as a catalyst for the water gas shift reaction a DFT investigation

2015-06-22
Toffoli, Daniele
Demirtaş, Merve
Toffoli, Hande

Suggestions

Performance of TPA loaded sba-15 catalyst in polypropylene degradation reaction
Ersoy Yalçın, Ulviy; Tutumlu, Zeynep.; Department of Chemical Engineering (2019)
Plastic materials are widely used due to their low cost and easy processing properties. With an increase in plastic usage, the amount of plastic wastes has also increased, and this situation causes environmental problems. Landfilling, incineration, and recycling are the methods used for the disposal of plastic wastes. Landfilling is not a convenient method as it causes soil pollution. Incineration is also not preferred due to its harmful effects on the environment caused by toxic gases. Recycling seems to b...
Performance of Acidic MCM-Like Aluminosilicate Catalysts in Pyrolysis of Polypropylene
Obali, Zeynep; Sezgi, Naime Aslı; Doğu, Timur (2009-01-01)
Mesoporous aluminosilicate catalysts having different Al/Si ratios were synthesized following a hydrothermal synthesis route and using different aluminum sources, such as aluminum nitrate and aluminum isopropoxide. These mesoporous materials have high surface areas, in the range of 520-1001 m(2)/g, and exhibit Type IV nitrogen adsorption isotherms. EDS and Al-27 MAS NMR results showed that aluminum was incorporated more effectively into the structure of the catalyst forming a tetrahedral framework when alum...
Performance of TPA Incorporated Cu-Zn based Catalysts in Dimethyl Ether and Methanol Synthesis from Syngas
Pekmezci Karaman, Birce; Oktar, Nuray; Sezgi, Naime Aslı; Gülşen, Doğu; Timur, Doğu (null; 2017-09-12)
Performance of polylactide biopolymer as matrix material for woven fiber composite laminates
Demirok, Gokberk; Kaynak, Cevdet (2022-01-01)
The first purpose of this study was, as the first time in the literature, to investigate usability of polylactide (PLA) biopolymer as the matrix of high-performance composite laminated structures having woven forms of glass and carbon fibers. For this purpose, 2-14 layers of 2 × 2 twill Carbon Fiber (CF) and 1 × 1 plain weave Glass Fiber (GF) forms were stacked by PLA powders followed by consolidation of these layers by compression molding technique. After conducting various tests and analysis it was observ...
Performance of ozone and peroxone on the removal of endocrine disrupting chemicals (EDCs) coupled with cost analysis
Ölmez Hancı, Tuğba; Dogruel, S.; Emek, A. D. Allar; Yilmazer, C. Eropak; Cinar, S.; Kiraz, O.; Citil, E.; Orhon, A. Koc; Siltu, E.; Gucver, S. M.; Ozgun, O. Karahan; Tanık, Ayşe Gül; Yetiş, Ülkü (IWA Publishing, 2020-08-01)
Micropollutants such as endocrine disruptors are one of the most important groups of chemicals polluting water resources. Conventional treatment systems may not be effective for the removal of endocrine disrupting chemicals (EDCs), and the fate of these chemicals should be carefully monitored in the effluent of wastewater treatment plants (WWTPs). Additional treatment methods such as advanced oxidation processes can be used for the removal of endocrine disruptors. This study presents the existence of endocr...
Citation Formats
D. Toffoli, M. Demirtaş, and H. Toffoli, “Performance of Mo2C as a catalyst for the water gas shift reaction a DFT investigation,” 2015, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/85512.