Use of a three stage system comprised of dark fermentation methanogenesis and photofermentation to improve energy production

2016-07-20
Bayramoğlu, Tuba Hande
Tunçay, Güneş
Koç, Engin
Gündüz, Ufuk
Eroğlu, İnci

Suggestions

Use of equivalent single porosity medium and automated lumped fluid composition simulation in naturally fractured gas condensate reservoirs
Ertürk, Mehmet Cihan; Sınayuç, Çağlar; Department of Petroleum and Natural Gas Engineering (2018)
Each naturally fractured gas condensate reservoir is unique and needs special interests for an accurate modelling study. Ordinarily, it is a very difficult task to conduct a fast and well-characterized simulation study and predict the performance of such reservoirs in view of the complicated thermodynamic behavior, the complex fluid composition, dual porosity behavior and significant computational time requirement. The numerical simulation of fractured gas condensate reservoirs offer remarkable potential fo...
Use of cadA-Specific Primers and DNA Probes as Tools to Select Cadmium Biosorbents with Potential in Remediation Strategies
İçgen, Bülent (Springer Science and Business Media LLC, 2016-05-01)
Biosorption, using cadmium-resistant bacterial isolates, is often regarded as a relatively inexpensive and efficient way of cleaning up wastes, sediments, or soils polluted with cadmium. Therefore, many efforts have been devoted to the isolation of cadmium-resistant isolates for the efficient management of cadmium remediation processes. However, isolation, identification and in situ screening of efficient cadmium-resistant isolates are primary challenges. To overcome these challanges, in this study, cadA, c...
Use of a new polymer based film for modified atmosphere packaging of fruits and vegetables
Türkeri (Babacan), Tuba; Bayındırlı, Alev; Department of Food Engineering (1999)
Utilization of fly ash-portland cement binary systems to control alkali-silica reaction
Çelen, Ahmet Ziya; Akgül, Çağla Meral.; Department of Civil Engineering (2019)
The highly alkaline pore solution of the portland cement concrete is not an ideal environment for certain reactive aggregates with poorly-crystalline or amorphous silica phases. In this environment, these aggregates partially or completely disintegrate resulting in formation of a hydrophilic, amorphous gel mainly composed of alkalis and water from the pore solution of the hydrated cement matrix and silica from the aggregates. The newly formed alkali-silica reaction (ASR) gel can expand by absorbing huge amo...
Utilization of friction stir processing to improve the mechanical properties of gas metal arc welded 5083 aluminum alloy plates
Takht Firouzeh, Shahin; Gür, Cemil Hakan; Department of Metallurgical and Materials Engineering (2016)
Fatigue failure of the welded structures is a major problem in engineering applications. It is known that the heat affected zone (HAZ) of the welded Al-alloys is prone to fail due to coarse microstructure and poor mechanical properties. Therefore, any improvement in HAZ may extend the service life of the welded component. The hypothesis of this study is that localized application of friction stir processing (FSP) before welding may improve the mechanical properties of HAZ, and thus, may reduce the fatigue c...
Citation Formats
T. H. Bayramoğlu, G. Tunçay, E. Koç, U. Gündüz, and İ. Eroğlu, “Use of a three stage system comprised of dark fermentation methanogenesis and photofermentation to improve energy production,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/85911.