Use of a new polymer based film for modified atmosphere packaging of fruits and vegetables

Download
082799.pdf
1999
Türkeri (Babacan), Tuba
Show full item record
104
views
0
downloads
https://hdl.handle.net/11511/2115
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Use of engineered cementitious composite panels for seismic strengthening
Ayatar, Mehmet Engin; Canbay, Erdem; Department of Civil Engineering (2018)
Due to the massive number of deficient buildings in seismically active zones, the demolition and rebuilding of such structures is not a viable option. Instead, rehabilitation of seismically deficient buildings is commonly employed. Although, the most preferred rehabilitation approach has been the application of RC infills to the frames, this technique inevitably causes the evacuation of the structure. Therefore, there have been many studies on new occupant-friendly strengthening techniques. The aim of this ...
Use of Fused Filament Fabrication and Stereolithography Methods for the Additive Manufacturing of Horn Antennas
Caliskan, Burak; Capraz, Kenan; Yaman, Ulaş (2023-01-01)
Additive Manufacturing (AM) is a rapidly developing set of methods with lots of benefits. This technology promises fast, cheap and lightweight fabrication for the antennas and waveguides. Different AM technologies such as Fused Filament Fabrication (FFF), Stereolithography (SLA), Material Jetting and Powder Bed Fusion are used to fabricate antennas operating at various frequency bands and provide desirable results. To test the feasibility of the AM technologies for antenna manufacturing, a specific antenna ...
Utilization of friction stir processing to improve the mechanical properties of gas metal arc welded 5083 aluminum alloy plates
Takht Firouzeh, Shahin; Gür, Cemil Hakan; Department of Metallurgical and Materials Engineering (2016)
Fatigue failure of the welded structures is a major problem in engineering applications. It is known that the heat affected zone (HAZ) of the welded Al-alloys is prone to fail due to coarse microstructure and poor mechanical properties. Therefore, any improvement in HAZ may extend the service life of the welded component. The hypothesis of this study is that localized application of friction stir processing (FSP) before welding may improve the mechanical properties of HAZ, and thus, may reduce the fatigue c...
Use of environmental performance indicators to promote cleaner technologies in small and medium sized cotton textile wet processing industry
Mirata, Murat; Yetiş, Ülkü; Department of Environmental Engineering (2000)
Use of equivalent single porosity medium and automated lumped fluid composition simulation in naturally fractured gas condensate reservoirs
Ertürk, Mehmet Cihan; Sınayuç, Çağlar; Department of Petroleum and Natural Gas Engineering (2018)
Each naturally fractured gas condensate reservoir is unique and needs special interests for an accurate modelling study. Ordinarily, it is a very difficult task to conduct a fast and well-characterized simulation study and predict the performance of such reservoirs in view of the complicated thermodynamic behavior, the complex fluid composition, dual porosity behavior and significant computational time requirement. The numerical simulation of fractured gas condensate reservoirs offer remarkable potential fo...
Citation Formats
T. Türkeri (Babacan), “Use of a new polymer based film for modified atmosphere packaging of fruits and vegetables,” Middle East Technical University, 1999.
METU IIS - Integrated Information Service open@metu.edu.tr