Determination of anion content of fogwater by ion chromatography and spectrophotometric methods

Download
1988
Erdal, Tarık

Suggestions

Determination of soot temperature, volume fraction and refractive index from flame emission spectrometry
Ayranci, Iail; Vaillon, Rodolphe; Selçuk, Nevin; Andre, Frederic; Escudie, Dany (2007-03-01)
An inversion scheme based on tomographic reconstruction of flame emission spectra has been developed for nonintrusive characterization of soot temperature and volume fraction fields within an optically thin axisymmetric flame by extracting characteristic information on soot refractive index from spectral gradients of emission spectra. Its performance is assessed by providing input data obtained from intensities simulated by a direct code based on experimental data for a flame available in the literature. Pr...
Determination of critical moisture content in porous materials by ir thermography
Tavukçuoğlu, Ayşe (2006-01-01)
This study is focused on the improvement on the porous material characterisation, measuring the transition stage between the saturated and dry phases, which has been defined in literature as the critical moisture content (Θc). This study develops a procedure based on Quantitative IR Thermography (QIRT) determining the effective Θc, as a physical property for the porous material. The Θc for San Marco bricks were examined in laboratory by QIRT and the standard gravimetric method (SGM). It was seen that QIRT c...
Determination of trace amounts of oxygen in inert gases using electrochemical method.
Amirah, Tawfic; Department of Chemistry (1970)
DETERMINATION OF SELENIUM IN HUMAN DIETS BY RADIOCHEMICAL NEUTRON-ACTIVATION ANALYSIS
ELHALLAQ, YH; GOKMEN, IG; ARAS, NK; Gökmen, Ali (Royal Society of Chemistry (RSC), 1992-03-01)
A post-irradiation radiochemical separation technique was tested for the determination of selenium levels in diet samples, collected by using a duplicate portion technique, from both rural and urban population groups in Turkey. The technique involved sample irradiation, acid digestion, selective distillation, precipitation and filtration steps. During the separations it was possible to determine the yield of each sample using a stable selenium carrier. An average chemical yield of 71 +/- 3% was obtained ...
Determination of metal concentrations in lichen samples by inductively coupled plasma atomic emission spectroscopy technique after applying different digestion procedures
Tuncel, Süleyman Gürdal; Dogangun, A (2004-05-28)
Three digestion procedures have been tested on lichen samples for application in the determination of major, minor and trace elements (Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Ph, V and Zn) in lichen samples collected in Aegean Region of Turkey by inductively coupled plasma atomic emission spectrometer (ICP-AES). The acid mixture of concentrated HNO3, H2O2 and HF were used. The instrument was optimized using lichen matrix considering RF power, nebulizer pressure, auxiliary flow rate and Pump rate. The acc...
Citation Formats
T. Erdal, “Determination of anion content of fogwater by ion chromatography and spectrophotometric methods,” Middle East Technical University, 1988.