Gömülü yapıların zemin-yapı-deprem etkileşiminde basitleştirilmiş çerçeve yöntemi

2008-10-17
Unutmaz, Berna
Çetin, Kemal Önder
Gökyay, M. Cevdet
Zemin Mekaniği ve Temel Mühendisliği Onikinci Ulusal Kongresi

Suggestions

Probabilistic methods for estimating the seismic deformations of underground structures
Soyman, Kadir Buğra; Gülerce, Zeynep; Department of Civil Engineering (2018)
In seismic design of underground structures, simplified semi-deterministic methods based on the stiffness of the soil and the underground structure are used to estimate the seismic deformations. Generally, peak ground acceleration (PGA) value for different hazard levels are provided by the probabilistic seismic hazard assessment (PSHA) analysis, but a single (and deterministic) PGA value is employed in deformation calculations. The objective of this study is to propose a fully probabilistic framework for es...
A comperative assessment of available methods for seismic performance evaluation of buried structures
Özcebe, Ali Güney; Çetin, Kemal Önder; Department of Civil Engineering (2009)
In the last three decades, seismic performance assessment of buried structures has evolved through the following stages : i) buried structures are not prone to seismically-induced damages, thus no need for detailed investigations, ii) eliminating soil-structure-earthquake interaction and use of seismically-induced free field ground deformations directly as the basis for seismic demand, thus producing conservative results, and finally iii) soil-structure and earthquake interaction models incorporating both k...
Determination of elastic properties of polymer nanocomposites using embedded element method
Altay, Aysu Elif; Gürses, Ercan; Department of Aerospace Engineering (2022-2)
Composites are preferred in different industries due to their high strength and lightness. Carbon nanotube (CNT) reinforced polymer composites are preferred composites due to their superior mechanical properties. CNTs in the material increase the stiffness of the structure positively, but the presence of CNTs makes the structure heterogeneous. The objective of this study is to determine the effective elastic properties of polymer nanocomposites using the embedded element method. Due to their nanosize, finit...
Laboratory experiments on improvement of buried flexible pipes by using geofoam
Söylemez, Berkan; Huvaj Sarıhan, Nejan; Department of Civil Engineering (2017)
Buried pipelines have become one of the most common, economical and safe means of conveying fluids (water, gas, petroleum, etc..) from a region to another ranging from very small (hundreds of meters) to large distances (thousands of kilometers). These pipes may be damaged and deform due to the application of different kinds of loading such as traffic loads, heavy static loads, sloping ground, etc. Such unwanted scenarios can be avoided by using geofoams in the flexible buried pipeline projects. In this stud...
Development and experimental verification of a structural health monitoring system for composite beams with embedded fibre bragg grating sensors
Değerliyurt, Boray; Şahin, Melin; Department of Aerospace Engineering (2017)
Structural Health Monitoring (SHM) is a discipline of development and application of monitoring and detecting adverse changes and damage in a structure in operation. This study explains development of a SHM system of composite beams with embedded Fibre Bragg Grating (FBG) sensors and its verification through experiments. There are considerations that require attention during manufacturing of composite specimens with embedded sensors. During manufacturing, protective teflon tubes are added to the ingress and...
Citation Formats
B. Unutmaz, K. Ö. Çetin, and M. C. Gökyay, “Gömülü yapıların zemin-yapı-deprem etkileşiminde basitleştirilmiş çerçeve yöntemi,” presented at the Zemin Mekaniği ve Temel Mühendisliği Onikinci Ulusal Kongresi, Konya, Türkiye, 2008, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/92396.