Development of the low pressure die casting technique for aluminium alloys.

Date

1976

Author

Meriç, Levent

Metadata

Show full item record

Item Usage Stats

58
views

0
downloads

URI

https://hdl.handle.net/11511/9285

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Development of Practical Extraction and Analysis Methods for Nonylphenol Compounds in Water and Wastewater Sanin, Faika Dilek; Ömeroğlu, Seçil (2014-09-21)
Development of lead alloys for valve-regulated lead-acid (VRLA) batteries Halıcı, Şafak; Aydınol, Mehmet Kadri; Department of Metallurgical and Materials Engineering (2010) In this study, Mg, Sn, Cd, Bi and Sb containing, five binary, three ternary and two quaternary different alloys to be used in a Valve-Regulated Lead-Acid (VRLA) batteries have been studied in terms of their mechanical and electrochemical properties. The investigated properties are hardness, passivity, corrosion rate, hydrogen gassing and the conductivity of the passive film. All electrochemical tests were carried out in 3.75 M H2SO4 solution by using open-circuit potential, anodic polarization, polarization...
Development of gluten-free wafer sheet formulations MERT, Selen; Şahin, Serpil; Şümnü, Servet Gülüm (2015-10-01) The main objective of this study was to develop gluten-free wafer sheet formulations by replacing rice flour partially with different gluten-free flours at different ratios. Rice-corn flour blends, rice-buckwheat flour blends and rice-chestnut flour blends with different ratios (80:20, 60:40, 40:60) were used in the experiments in order to find the higher quality and more nutritional gluten-free wafer sheet formulations. As a control, wafer sheet samples containing only rice flour and only wheat flour were ...
Development of anodes for direct oxidation of methane fuel in solid oxide fuel cells Akdeniz, Yelda; Timurkutluk, Bora; Timurkutluk, Cigdem (2016-06-22) In addition to pure hydrogen, solid oxide fuel cells (SOFCs) can utilize hydrocarbons as a fuel. However, conventional Ni-based anodes exhibit an excellent catalytic activity towards the hydrocarbon cracking reaction and thus the carbon deposition occurs in the anode. The deposited carbons quickly deactivate the anode irreversibly by covering the active surface of the anode catalyst. As a result, a significant degradation in the cell performance can be seen. In this study, the anode structure is modified by...
Development of an atomic beam-laser interaction apparatus and investigation of beam profiles and deflection. Abu Waer, Mahmoud; Department of Physics (1989)

Citation Formats

L. Meriç, “Development of the low pressure die casting technique for aluminium alloys.,” Middle East Technical University, 1976.