Comparison of single and joint effects of Zn and Cu in continuous flow and batch reactors

Download
index.pdf
2012-03-01
Şengör, Sema Sevinç
Moberly, James G.
Peyton, Brent M.
Ginn, Timothy R.
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
43
views
34
downloads
BACKGROUND: Microbial behavior in batch reactors may be different from that in continuous flow reactors, which is expected to affect microbial response to heavy metal exposure. Four parallel continuous flow reactors and batch growth tests were used to investigate the single and joint toxicity of Zn and Cu to Artrobacter sp. JM018.
https://hdl.handle.net/11511/93555
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY
Department of Environmental Engineering, Article

Suggestions

Comparison of anaerobic acrylic acid biotransformation in single- and two-stage pH-stat completely stirred tank reactor systems
Demirer, Göksel Niyazi; Speece, RE (Wiley, 2000-01-01)
Performance of single- and two-stage pH-stat completely stirred tank reactor (CSTR) systems for anaerobic acrylic acid biotransformation was investigated and compared. In the experiments, acetate was added with acrylic acid. Acetate concentration in both single- and two-stage reactors was continuously maintained at a nonlimiting concentration of 2000 +/- 200 mg/L. using a computer-controlled pH-stat system to allow observation of the effect of acrylate biotransformation on the more sensitive methanogenic st...
Analysis of velocity profiles in concentrated solid-liquid mixtures using ultrasound doppler velocimetry
Taşkın, Ahmet Fırat; Ayrancı Tansık, İnci; Uludağ, Yusuf; Department of Chemical Engineering (2021-7)
Stirred tanks are widely used for a variety of processes in industry such as solid dispersion, crystallization and dissolution processes. Several parameters are used to optimize these stirred tank processes such as impeller type, tank geometry and impeller speed. The flow field in the stirred tank is complex and varies depending on these parameters. In these processes diffusion and chemical reaction rate depend on the flow field and velocity fluctuations; therefore, information about the flow field is valua...
Comparison of single particle combustion behaviours of raw and torrefied biomass with Turkish lignites
Magalhaes, Duarte; Panahi, Aidin; Kazanç Özerinç, Feyza; Levendis, Yiannis A. (Elsevier BV, 2019-04-01)
This study investigated the combustion behaviour of single pulverized biomass and lignite coal particles under high temperature-high heating rate conditions. Selected fuels included three important agricultural residues in Turkey (olive residue, almond shell, and hazelnut shell), and two lignite coals from the regions of Tuncbilek and Soma in Turkey. Biomass fuels were either raw or torrefied at 275 degrees C for 30 min in nitrogen. The biomass fuels were sieved to a size cut of 212-300 mu m, and the coals ...
Investigation of thermal degradation characteristics of polyamide-6 containing melamine or melamine cyanurate via direct pyrolysis mass spectrometry
Isbasar, Ceyda; Hacaloğlu, Jale (2012-01-01)
In this work the changes in thermal degradation characteristics of polyamide 6 (PA6) in the presence of melamine (Me) or melamine cyanurate (MC) were investigated systematically via direct pyrolysis mass spectrometry. Though thermal stability of PA6 was not affected by the presence of flame retardants, the changes in the products and in their distributions were detected. The reaction of carbonyl groups of PA6 with amine groups of melamine was the main cause for the changes in the product distribution. In th...
Comparison of the short and long-term degradation behaviors of as-cast pure Mg, AZ91 and WE43 alloys
Ocal, Ezgi Butev; ESEN, ZİYA; Aydınol, Mehmet Kadri; Dericioğlu, Arcan Fehmi (Elsevier BV, 2020-02-01)
The corrosion behaviors of pure magnesium, AZ91, and WE43 alloys have been evaluated by weight loss, hydrogen evolution rate, pH change measurements and potentiodynamic polarization as well as electrochemical impedance spectroscopy (EIS) methods. Main corrosion product formed on the surface of Mg/Mg-alloys after immersion of 24 h was Mg(OH)(2) on the other hand, at the end of the 20 days additional CaCO3 which was found to display a critical role in degradation characteristics of the samples, was found. Exa...
Citation Formats
S. S. Şengör, J. G. Moberly, B. M. Peyton, and T. R. Ginn, “Comparison of single and joint effects of Zn and Cu in continuous flow and batch reactors,” JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY, vol. 87, no. 3, pp. 374–380, 2012, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/93555.
METU IIS - Integrated Information Service open@metu.edu.tr