Three- dimensional analysis of composite pinned joints

Download

056494.pdf

Date

1997

Author

Pekşen, Sinan

Metadata

Show full item record

Item Usage Stats

68
views

0
downloads

URI

https://hdl.handle.net/11511/9683

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Three Dimensional Grain Boundary Modeling in Polycrystalline Plasticity Yalçınkaya, Tuncay; Firat, Ali Osman (2018-04-25) At grain scale, polycrystalline materials develop heterogeneous plastic deformation fields, localizations and stress concentrations due to variation of grain orientations, geometries and defects. Development of inter-granular stresses due to misorientation are crucial for a range of grain boundary (GB) related failure mechanisms, such as stress corrosion cracking (SCC) and fatigue cracking. Local crystal plasticity finite element modelling of polycrystalline metals at micron scale results in stress jumps at...
Three Dimensional Analysis of Hypersonic Flow Around Re-entry Vehicles Using Navier-Stokes Equations Özgün, Muharrem; Eyi, Sinan (2015-06-16)
Three Dimensional Modeling of Inclined Surface Cracks in FGM Coatings Kosker, S.; Dağ, Serkan; YILDIRIM, BORA (2008-09-25) This study presents a three dimensional finite element method for mixed-mode fracture analysis of an FGM coating-bond coat-substrate structure. The FGM coating is assumed to contain an inclined semi-elliptical crack at the free surface. The trilayer structure is examined under the effect of transient thermal stresses. Strain singularity around the crack front is simulated by utilizing collapsed wedge-shaped singular elements. The modes I, II and III stress intensity factors are computed by applying the disp...
Three dimensional failure analysis of pin jointed composite laminates Evcil, Ali; Parnas, Kemal Levend; Department of Mechanical Engineering (2000)
Three Dimensional Flow Analysis of a Cavity-Based Scramjet Combustor Rouzbar, Ramin; Eyi, Sinan (2015-06-22)

Citation Formats

S. Pekşen, “Three- dimensional analysis of composite pinned joints,” Middle East Technical University, 1997.