Küçük bir turbojet motorunun tasarım, geliştirme ve üretim süreci: Bölüm 2

Alemdaroğlu, Hüseyin Nafiz
Çevik, Mert
Polat, Cuma
Başkan Perçin, Özge
Atalayer, Çağlar
Elbir, Ahmet
Dedekargınoğlu, Rıza Can
Sağol, Ece
Akgün, Serhat
Gezgüç, Çağrı
Buzkıran, Mete
Özdemir, Gürbüz Taha
Mercan, Bayram
Kapulu, Özge
2. Ulusal Havacılık ve Uzay Konferansı


Küçük bir turbojet motorunun tasarım, geliştirme ve üretim süreci Bölüm 3- Üretim
Alemdaroğlu, Hüseyin Nafiz; Polat, Cuma; Başkan Perçin, Özge; Akgün, Serhat; Çevik, Mert; Dedekargınoğlu, Rıza Can; Sağol, Ece; Elbir, Ahmet; Atalayer, Çağlar; Kapulu, Özge; Buzkıran, Mete; Mercan, Bayram; Gezgüç, Çağrı; Özdemir, Gürbüz Taha (2008-10-16)
An electronic control unit design for a miniature jet engine
Polat, Cuma; Dölen, Melik; Department of Mechanical Engineering (2010)
Gas turbines are widely used as power sources in many industrial and transportation applications. This kind of engine is the most preferred prime movers in aircrafts, power plants and some marine vehicles. They have different configurations according to their mechanical constructions such as turbo-prop, turbo-shaft, turbojet, etc. These engines have different efficiencies and specifications and some advantages and disadvantages compared to Otto-Cycle engines. In this thesis, a small turbojet engine is inves...
Retscreen decision support system for prefeasibility analysis of small hydropower projects
Küçükbeycan, Mehmet; Altınbilek, Doğan H.; Department of Civil Engineering (2008)
Renewable energy sources are getting much more important to reduce the increasing threat coming from greenhouse gases. Hydropower is the most important source of renewable energy. However, development of a hydropower project is a challenging engineering process. Several computer programs have been developed to make initial estimations on hydropower schemes. A computer program named RETScreen Small Hydro Project Model has been developed with the objective to make complete pre-feasibility studies including co...
Mathematical modeling of a small-scale helicopter and mrac design with time based uncertainty parametrizations
Gürler, Mustafa; Kutay, Ali Türker; Department of Aerospace Engineering (2018)
In this thesis, nonlinear mathematical modeling of a small scale model helicopter is presented. In addition, problems in uncertainty parametrization component of Model Reference Adaptive Control (MRAC) is investigated and external uncertainty on the system is parametrized using universal approximators such as Fourier Series and Chebyshev Polynomials in time dependent form. Advantages of using times based universal approximators in MRAC design of MIMO systems are presented. Proposed controller is tested on t...
The Tale of industrialization in a small town in Turkey : Hacılar - Kayseri
Cengiz, Kurtuluş; Şen, Mustafa; Department of Sociology (2012)
This dissertation analyses the industrial transformation of Turkey by focusing on the history of Kayseri’s small town Hacılar which has been showed an extraordinary performance in industry and economic development in the last 40 years. However, it is not a general history of industrialization; but a local development story from a traditional rural/ village community to an industrial production zone in relation with the local, national and universal dynamics. In line with the historical materialist conceptua...
Citation Formats
H. N. Alemdaroğlu et al., “Küçük bir turbojet motorunun tasarım, geliştirme ve üretim süreci: Bölüm 2,” presented at the 2. Ulusal Havacılık ve Uzay Konferansı, İstanbul, Türkiye, 2008, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/97627.