EXPERIMENTAL INVESTIGATION OF LANDSLIDE GENERATED WAVES IN A LABORATORY TEST SET-UP

2022-06-06
Karayama, Erhan Tarık
Aydın, İsmail
DEMİREL, ENDER
Kürümüş, Anıl Tolga
Barough, Reza Mohajer

Suggestions

Experimental investigation of an atmospheric fluidized bed coal combustor
Kırmızıgül, Ümit; Selçuk, Nevin; Department of Chemical Engineering (1989)
Experimental Investigation of a Slug Motion in an Inclined Pipe System
Dinçer, Ali Ersin; Bozkuş, Zafer (null; 2018-09-14)
Liquid slugs trapped in a voided line may damage the pipe systems used in thermal power plants. Problems in those plants have been reported in the literature. In order to prevent the failures of the pipes, the impact pressures due to slugs should be predicted as accurately as possible. In the present study, slug motion is experimentally investigated. Experiments are conducted to measure impact force due to slug flow for a larger pipe diameter which represent the real piping systems better. An inclined...
Experimental investigation on upward forced convection in vertical pipes with constant surface temperature
Özyurt, Ercüment; Oskay, Rüknettin; Department of Mechanical Engineering (1999)
EXPERIMENTAL INVESTIGATION OF THE EFFECTS OF WAVEFORM TIP INJECTION IN A LOW PRESSURE TURBINE CASCADE
Mercan, Bayram; Dogan, Eda; Ostovan, Yashar; Uzol, Oğuz (2012-06-15)
This paper presents the results of an experimental study that investigates the effects of uniform/waveform tip injection along the camberline on the total pressure loss and wake flow characteristics downstream of a row of Low Pressure Turbine (LPT) blades. The experiments are performed in a low speed cascade facility. This injection technique involves spanwise jets at the tip that are issued from a series of holes along the camber line normal to the freestream flow direction. The injection mass flow rate fr...
Experimental analysis of curved laminated beam
Uzhan, Tevfik; Aşık, Mehmet Zülfü; Department of Engineering Sciences (2010)
In this thesis, experimental studies are carried out on curved laminated glass beams to form a database for the scientists who may like to test their mathematical models. Beams which are only free to rotate and constrained in radial direction at both ends are tested to make the data available for further calculations. Test setup is prepared to minimize error that could occur due to test setup and data readings. Material testing machine and 4 channel data collecting machine are used to measure the signals at...
Citation Formats
E. T. Karayama, İ. Aydın, E. DEMİREL, A. T. Kürümüş, and R. M. Barough, “EXPERIMENTAL INVESTIGATION OF LANDSLIDE GENERATED WAVES IN A LABORATORY TEST SET-UP,” presented at the 14th INTERNATIONAL CONFERENCE ON HYDROSCIENCE AND ENGINEERING, İzmir, Türkiye, 2022, Accessed: 00, 2022. [Online]. Available: https://www.iche2022.org/_files/ugd/21d103_51932d6e536e48a1a27641b61173d26c.pdf.