Platinum nanocatalysts prepared with different surfactants for C1-C3 alcohol oxidations and their surface morphologies by AFM

2012-06-01
Ertan, Salih
Sen, Fatih
Sen, Selda
Gökağaç Arslan, Gülsün
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
62
views
0
downloads
In this study, platinum nanoparticle catalysts have been prepared using PtCl4 as a starting material and 1-octanethiol, 1-decanethiol, 1-dodecanethiol, and 1-hexadecanethiol as surfactants for methanol, ethanol, and 2-propanol oxidation reactions. The structure, particle sizes, and surface morphologies of the catalysts were characterized by X-ray diffraction (XRD), atomic force microscopy and transmission electron microscopy (TEM). XRD and TEM results indicate that all prepared catalysts have a face-centered cubic structure and are homogeneously dispersed on the carbon support with a narrow size distribution (2.0-1.3 nm). X-ray photoelectron spectra of the catalysts were examined and it is found that platinum has two different oxidation states, Pt(0) and Pt(IV), oxygen and sulfur compounds are H2Oads and OHads, bound and unbound thiols. The electrochemical and electrocatalytic properties of these catalysts were investigated with respect to C1-C3 alcohol oxidations by cyclic voltammetry and chronoamperometry. The highest electrocatalytic activity was obtained from catalyst I which was prepared with 1-octanethiol. This may be attributed to a decrease in the ratio of bound to unbound thiol species increase in Pt (0)/Pt(IV), H2Oads/OHads ratios, electrochemical surface area, CO tolerance and percent platinum utility.
Direct alcohol fuel cells, Platinum catalysts, Cyclic voltammetry, Transmission electron microscopy, X-ray photoelectron spectroscopy, Atomic force microscopy, METHANOL OXIDATION, FUEL-CELLS, CARBON, NANOPARTICLES, PTRU, 2-PROPANOL, REDUCTION, CATALYSTS, SPECTROSCOPY, TEMPERATURE
https://hdl.handle.net/11511/100751
JOURNAL OF NANOPARTICLE RESEARCH
Department of Chemistry, Article

Suggestions

High performance Pt nanoparticles prepared by new surfactants for C-1 to C-3 alcohol oxidation reactions
ŞEN, FATİH; Gökağaç Arslan, Gülsün; Sen, Selda (Springer Science and Business Media LLC, 2013-09-07)
In this study, platinum nanoparticles have been prepared using PtCl4 as a starting material and 1-hexylamine, N-methylhexylamine, N,N-dimethylhexylamine, 1-heptylamine, N-methylheptylamine, and N, N-dimethylheptylamine as surfactants. All these surfactants were used in this synthesis, for the first time, to explore the effect of primary, secondary, and tertiary amine and chain length on the size and catalytic activity toward C1-C3 alcohol electro-oxidation. The electrochemical performance of all catalysts w...
Preparation and characterization of carbon supported platinum nanocatalysts with different surfactants for C1 to C3 alcohol oxidations
Ertan, Salih; Gökağaç Arslan, Gülsün; Department of Chemistry (2011)
In this thesis, carbon supported platinum nanoparticles have been prepared by using PtCl4 as a starting material and 1-octanethiol, 1-decanethiol, 1-dodecanethiol and 1-hexadecanethiol as surfactants for methanol, ethanol and 2-propanol oxidation reactions. The structure, particle sizes and surface morphologies of the platinum were characterized by X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy (TEM). XRD and TEM results indicate that all prepared catalysts have ...
Carbon-supported PT nanoparticles prepared by new surfactants and different reducing agents for methanol oxidation reaction
Kalyoncu, Sevda; Gökağaç Arslan, Gülsün; Department of Chemistry (2015)
In this thesis, carbon supported platinum catalysts were synthesized to investigate the effect of reducing agent and surfactant on the performance of catalyst towards methanol oxidation reaction. For this purpose, the catalysts were prepared by using PtCl4 as a starting material, propylamine (a) and dipropylamine (b) as surfactant, and sodium borohydride (catalyst I) and formaldehyde (catalyst II) as reducing agent. The prepared catalysts were characterized by X-ray diffraction (XRD), transmission electron ...
Catalytic oxidation of nitrogen containing compounds for nitrogen determination
Karakaş, Gürkan (2019-02-15)
The high temperature catalytic oxidation (HTCO) performance of Al2O3 supported Pt, Cu, Cu-Ce and Fe catalysts were systematically studied with a perspective of selective oxidation of nitrogenous compounds to nitric oxide for quantitative determination of bound nitrogen. The catalyst samples were prepared via impregnation and characterized by XRD and BET. In addition, temperature programmed reaction experiments with acetonitrile and oxygen were conducted to evaluate the catalytic activity and selectivity tow...
The preparation and characterization of nano-sized Pt-Pd/C catalysts and comparison of their superior catalytic activities for methanol and ethanol oxidation
Ozturk, Zafer; Sen, Fatih; Sen, Selda; Gökağaç Arslan, Gülsün (2012-12-01)
In this study, two groups of carbon supported PtPd samples with different percentages of metals were prepared to examine the effects of Pd and stabilizing agents on the catalytic activity towards methanol and ethanol oxidation reactions. As a stabilizing agent, 1-hexanethiol and 1,1-dimethyl hexanethiol were used for group "a" and "b" catalysts, respectively. Cyclic voltammetry, chronoamperometry, X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy, and X-ra...
Citation Formats
S. Ertan, F. Sen, S. Sen, and G. Gökağaç Arslan, “Platinum nanocatalysts prepared with different surfactants for C1-C3 alcohol oxidations and their surface morphologies by AFM,” JOURNAL OF NANOPARTICLE RESEARCH, vol. 14, no. 6, pp. 0–0, 2012, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/100751.
METU IIS - Integrated Information Service open@metu.edu.tr