An Investigation on the problems of applicability of co-makership

Download
068583.pdf
1997
Dawoud, Khaled Mahmoud
Show full item record
147
views
0
downloads
https://hdl.handle.net/11511/10103
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

An investigation on the application of operational modal analysis
Büke, Fatih; Özgüven, Hasan Nevzat; Department of Mechanical Engineering (2006)
Modal parameter identification of a structure is done through modal testing and modal analysis using various system identification methods. These methods employ linear input-output relationships to extract the modes of a structure. There are cases where laboratory testing of a structure is not possible or information about the structure under operating conditions is seeked. A set of techniques called Operational Modal Analysis have been developed for modal parameter identification in operating conditions of...
Fetiş Nesnesinin Fallus ile İlişkisi Üzerine Bir İnceleme
Gençöz, Faruk; Ergün, Sevinç; Hekimoğlu, Eylül Ceren (ODTÜ- AYNA Klinik Psikoloji Destek Ünitesi, 2022-6)
Perversiyon yapısının içinde yer alan fetişizm, öznenin kastrasyon kaygısına karşı kendisini savunma yollarından birisidir. Burada babasal işlevin yetersizliği sonucu, annedeki eksikliğin özne tarafından inkârı söz konusudur. Özne, annenin baba tarafından adlandırılmamış eksiğiyle karşı karşıya kaldığında, annenin fallusu olmak ya da olmamak arasında bir seçim yapmak zorunda kalır. Yoğun bir kaygı yaşayan özne, bu durumla baş etmek amacıyla fetiş nesnesini annedeki eksiği kapatmak için bir çözüm olarak kull...
An investigation on the analysis and design of a prosthetic arm
Toğay, Atilla; Özgören, Kemal; Department of Mechanical Engineering (1992)
An investigation of the principles of laboratory-scale particle-bed comminution
Cimilli, Hande; Hoşten, Çetin; Department of Mechanical Engineering (2008)
The objective of this thesis is to investigate the principles of laboratory-scale particle bed comminution in a piston-die-press. The feed materials used in this investigation are quartz and calcite which were stage-crushed and dry screened to produce 3.35 x 2.36, 2.36 x 1.7, 1.7 x 1.18, 1.18 x 0.85, and minus 0.85mm size fractions. First, these narrow size fractions (excluding minus 0.85mm fraction) were comminuted under different pressures to determine the baseline for energy utilization. Then, these size...
An investigation on the water supply and drainage systems of historical turkish baths
Dişli, Gülşen; Tavukçuoğlu, Ayşe; Department of Architecture (2008)
Historical Turkish baths still keeping their functional systems represent their original architectural and building technologies. Studies on the functional systems of historical baths are therefore needed to discover such technologies and to maintain them in working order. This study was conducted on a 15th century historical Turkish bath, Şengül Hamamı, in Ankara for assessment of its water supply and drainage systems. These systems comprised of hot and cold-water supply, wastewater and rainwater drainage,...
Citation Formats
K. M. Dawoud, “An Investigation on the problems of applicability of co-makership,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr