Control configuration selection for a high-purity industrial distillation column with side stream

Download
029402.pdf
1993
Taskin, Mustafa Ertan
Show full item record
83
views
0
downloads
https://hdl.handle.net/11511/10112
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

CONTROL CONFIGURATION SELECTION FOR THE INFERENTIAL CONTROL OF A HIGH-PURITY DISTILLATION COLUMN
ALKAYA, D; ARIBURNU, D; OZGEN, C; GURKAN, T (1992-09-08)
Control Strategy of Permanent Magnet Synchronous Generator for Stand Alone Wind Power Generation System
Lachguer, Nora; Tahar Lamchich, Moulay (2011-09-10)
This paper presents the control strategy of the permanent magnet synchronous generator (PMSG) for stand-alone wind power generation system with battery energy storage management during wind speed and load variations. The complete system includes a PMSG connected to the load through a fully controlled back to back PWM converter and an intermediate DC link capacitor which is connected to a battery energy storage system through a bidirectional dc-dc converter. The control strategy to a stand-alone wind convers...
Control of Planar Spring-Mass Running Through Virtual Tuning of Radial Leg Damping
Secer, Gorkem; Saranlı, Uluç (Institute of Electrical and Electronics Engineers (IEEE), 2018-10-01)
Existing research on dynamically capable legged robots, particularly those based on spring-mass models, generally considers improving in isolation either the stability and control accuracy on the rough terrain, or the energetic efficiency in steady state. In this paper, we propose a new method to address both, based on the hierarchical embedding of a simple spring-loaded inverted pendulum (SLIP) template model with a tunable radial damping coefficient into a realistic leg structure with series-elastic actua...
Control system design for a haptic device
Bideci, Süleyman; Konukseven, Erhan İlhan; Department of Mechanical Engineering (2007)
In this thesis, development of a control system is aimed for a 1 DOF haptic device, namely Haptic Box. Besides, it is also constructed. Haptic devices are the manipulators that reflect the interaction forces with virtual or remote environments to its users. In order to reflect stiffness, damping and inertial forces on a haptic device position, velocity and acceleration measurements are required. The only motion sensor in the system is an incremental optical encoder attached to the back of the DC motor. The ...
Control and simulation studies for a multicomponent batch packed distillation column
Ceylan, Hatice; Özgen, Canan; Department of Chemical Engineering (2007)
During the last decades, batch distillation is preferably used with an increasing demand over continuous one, to separate fine chemicals in chemical and petroleum industries, due to its advantages like, flexibility and high product purity. Consequently, packed distillation columns, with newly generated packing materials, are advantageous compared to plate columns because of their smaller holdups, resistivity to corrosive materials and their higher separation efficiencies. Also, in many industrial applicatio...
Citation Formats
M. E. Taskin, “Control configuration selection for a high-purity industrial distillation column with side stream,” Middle East Technical University, 1993.
METU IIS - Integrated Information Service open@metu.edu.tr