Effects of the maximum size of natural aggregate on the compressive strengh of concrete

Download
035594.pdf
1994
Tuncer, Mehtap
Show full item record
121
views
0
downloads
https://hdl.handle.net/11511/10205
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Effects of the maximum size of crushed aggregate on the compressive strength of concrete.
Altunsu, Halil Tuncay; Erdoğan, Turhan Y.; Department of Civil Engineering (1993)
Effects of different bed roughnesses on the characteristics of hydraulic jumps
Velioğlu, Deniz; Tokyay, Nuray; Department of Civil Engineering (2012)
In practice, baffle blocks and sills are commonly being used to stabilize the location of a hydraulic jump and shorten the length of a stilling basin. On the other hand, gravels, corrugations and rectangular prismatic roughnesses which cover the entire length of the basin or placed in a staggered manner may be an alternative. The objective of this study is to determine the effects of these roughness elements on the characteristics of hydraulic jumps such as conjugate depth, jump length and energy dissipatio...
Effects of inclination of bridge piers on scouring depth
Bozkuş, Zafer (2004-08-01)
For a safe design of a bridge pier footing, it is important to estimate the maximum depth of scour as accurately as possible. The aim of this experimental study is to investigate the effects of inclination of bridge piers on local scour depths around bridge piers. Single circular piers inclined toward the downstream direction were founded in a uniform bed material. Near threshold conditions were employed. The results of this study indicate that the local scour depth decreases as the inclination of the pier ...
Effects Of Mandrel Shank Positions And The Gap Values Between The Mandrel Balls And The Tube On The Thinning And The Ovality İn Rotary Draw Bending
Ozcan, Bahadir; Evis, Zafer; ÖZTÜRK, FAHRETTİN (2022-1-01)
Tube and tube systems are very critical components to fulfill the design requirement of applications. Especially the bending radius is most important factor in a tube bending process. Therefore, as the bend ratio (bending radius/outer diameter of tube) and the wall thickness of the tube material decrease, the risk of encountering defects such as wrinkles, ovality, wall thinning, and crack increases. Rotary draw bending process is generally preferred for bending tubes with a small bend ratio and thin wall th...
Effect of the surface roughness and construction material on wall slip in the flow of concentrated suspensions
Gulmus, Sergul Acikalin; Yılmazer, Ülkü (Wiley, 2007-03-05)
Recent studies on polyethylene, elastomers, and thermoplastics have revealed that the construction material and surface roughness are two important factors affecting wall slip. In this study, to determine the true rheological behavior of model concentrated suspensions, a multiple-gap separation method was used in a parallel disk rheometer. The model suspensions studied were poly (methyl methacrylate) particles with an average particle size of 121.2 mu m in hydroxyl-terminated polybutadiene. The aim of this ...
Citation Formats
M. Tuncer, “Effects of the maximum size of natural aggregate on the compressive strengh of concrete,” Middle East Technical University, 1994.
METU IIS - Integrated Information Service open@metu.edu.tr