Behaviour of high-strength concrete columns under eccentric compression-tied columns

Download
1995
Canbay, Erdem

Suggestions

Behaviour of high-strength concrete columns under starin gradient- tied columns
Yıldırım, Ahmet; Özcebe, Güney; Department of Civil Engineering (1997)
Behaviour of CFRP confined low strength concrete columns under temperature changes
Erdil, Barış; Akyüz, Uğurhan; Yaman, İsmail Özgür (2012-12-01)
In this study, an experimental program was established to understand the behaviour of FRP-confined low strength cylindrical and square-section concrete columns under temperature changes. The experimental program was divided into four groups. First group of specimens were kept under room temperature and used as control specimens. In the second group, specimens were exposed to predetermined heating-cooling cycles in a specially designed environmental test chamber. Third group of specimens were placed in water...
Behaviour of an exterior precast beam-column joint under reserved cyclic loading
Baysal, Mehmet Zafer; Ersoy, Uğur; Tankut, Tuğrul; Department of Civil Engineering (1991)
Behaviour of AAC infilled RC frames under in plane and out of plane seismic demands
Binici, Barış; Aldemir, Alper; Canbay, Erdem; Yakut, Ahmet (2017-11-24)
Observations after several earthquakes revealed that infill walls may significantly alter the response of reinforced concrete frame buildings. They increase the lateral stiffness and strength of frames subjected to low to moderate in-plane seismic excitation, however they may experience sudden failure under the combined action of in-and out-of-plane seismic demands. Autoclaved aerated concrete (AAC) is a popular choice of infill wall material due to its advantages such as light weight, good insulation and h...
BEHAVIOUR OF HTPB-POLYURETHANE ELASTOMER MATERIAL REINFORCED WITH MICRO AND NANO PARTICLES
Erten, Emre; Kaynak, Cevdet; Atalar, Taner; Department of Metallurgical and Materials Engineering (2022-8)
Hydroxyl-Terminated-Polybutadiene Polyurethane (HTPB-PU) elastomer materials are mainly used in the “liner” layer of solid propellant rocket motor cases. The required levels of mechanical and thermal properties are obtained by reinforcing this elastomer matrix with approximately 10 wt% micron-sized carbon black (mCB) particles. Therefore, the main purpose of this study was to investigate effects of mCB alone and then when used together with 3 wt% nano-sized carbon black (nCB), micron-sized zirconia (mZrO2),...
Citation Formats
E. Canbay, “Behaviour of high-strength concrete columns under eccentric compression-tied columns,” Middle East Technical University, 1995.