Determination of some characteristics and specifications for locally available

Date

1980

Author

Varol, M. Yasar

Metadata

Show full item record

Item Usage Stats

93
views

0
downloads

URI

https://hdl.handle.net/11511/10362

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Determination of design parameters for optimum operation of a cross flow fan Uskaner, Yusuf Azrail; Göksel, Ömer T.; Department of Mechanical Engineering (1990)
Determination of the important parameters for high quality white-roasted chickpea production Afacan, Neşe; Esin, Ali; Katnaş, Zeynep; Department of Food Engineering (2000)
Determination of Reliabffity Based New Load and Resistance Factors for Reinforced Concrete Structural Members Firat, Fatih Kursat; Yücemen, Mehmet Semih (2014-07-01) In this study, a procedure for the determination of new load and resistance factors for reinforced concrete structural members is proposed in view of the fact that the design practice in Turkey has changed after the occurrence of major earthquakes. The implementation of the procedure is carried out for the shear failure mode of reinforced concrete beams subjected to dead and live load combination. First, the statistical parameters for the quantification of uncertainties involved in the design variables are ...
Determination of maximum permissible waste heat load for selected points of awter basins Onal (Ozatagan), Sevgul; Department of Environmental Engineering (1980)
Determination of optimum values for voltage setpoints of power stations in Turkey Elma, İsmail; Güven, Ali Nezih; Tör, Osman Bülent; Department of Electrical and Electronics Engineering (2014) Voltage control is performed in three hierarchical levels in Turkish power system: primary, secondary and tertiary voltage control. Primary and secondary voltage controls are defined as the regulation of the voltage at the generator terminal and at the high voltage busbar of the power plant according to the pre-determined setpoints. The determination of the voltage setpoints for the power plants, which is defined as the tertiary voltage control, is performed by the operators in National and Regional Load Di...

Citation Formats

M. Y. Varol, “Determination of some characteristics and specifications for locally available,” Middle East Technical University, 1980.