Design and control of a phase-shift PWM resonant converter for an X-ray generator

Download
056630.pdf
1996
Eskandarzadeh, Iraj
Show full item record
64
views
0
downloads
Resonant converter., X-Ray generator., X-Ray tubes.
https://hdl.handle.net/11511/1039
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design of a Power Plant Emulator for the Dynamic Frequency Stability Studies
Duymaz, Erencan; Pourkeivannour, Siamak; Ceylan, Doğa; ŞAHİN, İLKER; Keysan, Ozan (2018-10-25)
Increasing renewable energy integration to grid requires inertial support to improve frequency stability of the power system. Inertial support of renewable energy systems requires hardware verification in order to test practical limitations and absence of dynamical grid simulators makes verification studies more challenging. In this study, a test rig which is composed of a DC motor, an AC synchronous generator and an external flywheel, is developed in order to provide a platform in which dynamic properties ...
Design and development of a complex shear modulus measurement setup for viscoelastic materials
Özgen, Gökhan Osman (2005-01-01)
Details of the design and development study of a complex shear modulus measurement setup for viscoelastic materials have been presented in this paper. The new setup is specifically designed for measuring the complex shear modulus of pressure sensitive adhesives. The setup consists of a rigid block that is connected to a rigid fixture through two identical shear specimens of the viscoelastic material to be tested. The rigid block and the shear specimens resemble a single degree of freedom system. Once the fr...
Design of a tubular switched reluctance linear generator for wave energy conversion based on ocean wave parameters
Mendes, R. P. G.; Calado, M. R. A.; Mariano, S. J. P. S.; Cabrita, C. M. P. (2011-09-10)
This work presents a procedure for the design and analysis of a linear tubular switched reluctance generator for wave energy conversion. The generator is meant to be applied to a direct drive wave energy converter, namely a point absorber. The device is modeled according to wave climate conditions at Esposende site in the Portuguese coast. The procedure starts with statistical analysis of the local random ocean behavior in order to determine most likely values of occurrence for the wave parameters in questi...
Design of a Resonator-on-Microchannel (RoM) for Gravimetric Detection Applications in Liquid Environment
Kangul, M.; AYDIN GÖL, EBRU; Gökce, Fuat; Toral, T.; Zorlu, O.; Külah, Haluk (Elsevier BV; 2016-09-07)
This paper presents a novel biosensor structure consisting of a resonator placed at the top wall of a microchannel (Resonator-on-Microchannel: RoM). The proposed biosensor structure is aimed to be used for real-time gravimetric detection of microscale biological targets in liquid environment by tracking the resonance frequency change of the system as the sought particles/cells are attached to the resonator surface. The damping effects are minimized with the help of the proposed resonator placement as well a...
Design and implementation of an unregulated DC DC transformer DCX module using LLC resonant converter
Alemdar, Şahin; Keysan, Ozan (2016-08-20)
Traditional high-power centralized front-end DC/DC converter can be replaced with an array of paralleled standardized DC/DC transformer (DCX) modules when load current sharing is accomplished between individual modules. In this study, an LLC resonant converter is proposed as an unregulated DCX module, which has current sharing capability. Current sharing feature is implemented by using the droop current sharing method. A methodical design process is presented for the selection of the resonant tank component...
Citation Formats
I. Eskandarzadeh, “Design and control of a phase-shift PWM resonant converter for an X-ray generator,” Ph.D. - Doctoral Program, Middle East Technical University, 1996.
METU IIS - Integrated Information Service open@metu.edu.tr