A new bearing alloy zinc aluminium.

Erdemir, Ali Hakan


A new A.C/D.C convertor for variable frequency/magnitude input.
Yıldırım, Nur; Department of Electrical Engineering (1972)
A new control system for induction heating applications.
Keklik, Haşim; Department of Electrical Engineering (1986)
A New Dual- Input Hybrid Buck DC-DC Converter
Gavris, M.; Muntean, N.; Cornea, O. (2011-09-10)
The proposed dual input hybrid buck C/hybrid buck L (HBCL) DC-DC converter, is suitable for power conversion in renewable energy, automotive and telecom power systems. It extends the use of the hybrid DC-DC converters in a dual-input structure, with high voltage-conversion ratio. Operation modes, analytical description, digital simulations and test results, in good correspondence, are presented and discussed in this paper.
A new ceramic material for shell investment casting.
Yılmaz, M. Uğur; Department of Metallurgical Engineering (1978)
An all 50 ohm divider/combiner structure
Turan, Emin; Demir, Şimşek (2002-01-01)
A novel microwave power divider/combiner structure is presented in this paper. The analysis of the structure is based on the exact matching conditions at input/output ports and a perfect isolation condition between the dividing/combining arms (ports). To analyze the structure, the necessary set of nonlinear equations is derived first, and then solved. For a special case an all-50 Ω structure is obtained (the characteristic impedances of the transmission line sections and the value of the isolation resistanc...
Citation Formats
A. H. Erdemir, “A new bearing alloy zinc aluminium.,” Middle East Technical University, 1993.