Inner cathodic protection of steel pipes carrying sea water.

Download
023582.pdf
1992
Mahmutoğlu, Mehmet Zeki
Show full item record
37
views
0
downloads
https://hdl.handle.net/11511/10936
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Inner ring fatigue analysis of rolling element bearings
Eroğlu, Barış; Darendeliler, Haluk; Department of Mechanical Engineering (2009)
Rolling element bearings are the one of the most widely used machine elements in the industry. The most important criterion in bearing selection is the endurance life. The first attempts on the prediction of the endurance life of rolling elements bearings are done by Lundberg and Palmgren in 1950s (Harris, 1999). Their work adopted as an ANSI, ABMA and ISO standard which is widely used in industry today. The basic assumption of Lundberg-Palmgren formulation is that no matter how small the load applied on ro...
Lateral buckling of deep plate girders.
Melen, Ugur; Department of Civil Engineering (1979)
Lateral stiffness of steel plate shear wall systems
Topkaya, Cem (Elsevier BV, 2009-08-01)
The accuracy of the finite element method and strip method of analysis for calculating the lateral stiffness of steel plate shear wall (SPSW) systems is assessed by making comparisons with experimental findings. Comparisons revealed that while both methods provide acceptable accuracy, they also require the generation of sophisticated computer models. In this paper, two alternative methods are developed. The first one is an approximate hand method based on the deep beam theory. The classical deep beam theory...
Concrete resistance against flow of high velocity under subatmospheric pressure.
Cömert, Ertuğrul; Department of Civil Engineering (1969)
Lateral stiffness of unstiffened steel plate shear wall systems
Atasoy, Mehmet; Topkaya, Cem; Department of Civil Engineering (2008)
Finite element method and strip method are two widely used techniques for analyzing steel plate shear wall (SPSW) systems. Past research mostly focused on the prediction of lateral load capacity of these systems using these numerical methods. Apart from the lateral load carrying capacity, the lateral stiffness of the wall system needs to be determined for a satisfactory design. Lateral displacements and the fundamental natural frequency of the SPSW system are directly influenced by the lateral stiffness. In...
Citation Formats
M. Z. Mahmutoğlu, “Inner cathodic protection of steel pipes carrying sea water.,” Middle East Technical University, 1992.
METU IIS - Integrated Information Service open@metu.edu.tr