Production of tungsten metal powder from APT by hydrogen reduction.

1985
Dayıoğlu, Mehmet
Show full item record
73
views
0
downloads
https://hdl.handle.net/11511/11067
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Production of boron nitride nanotubes from the reaction of NH₃ with boron and iron powder mixture
Noyan, Selin; Sezgi, Naime Aslı; Department of Chemical Engineering (2012)
Boron nitride nanotubes (BNNTs), which are structurally similar to carbon nanotubes (CNTs), were synthesized in 1995 for the first time. They are made up by folding atom sheets which consist of boron and nitrogen atoms into cylindrical form. After their discovery, BNNTs have been attracting great attention due to their extraordinary mechanical, thermal, electrical, and optical properties. In this study, BNNTs were synthesized from the reaction of ammonia gas with the boron and iron powder mixture in a tubul...
PRODUCTION OF SILVER LOADED PHOTOCATALYTIC TIO2 POWDERS BY BALL MILLING
Aysin, Basak; PARK, JONGEE; Öztürk, Abdullah (2011-09-23)
The present study was undertaken to improve photocatalytic efficiency of TiO2 powder by silver doping and/or particle size reduction through mechanical ball milling. A planetary ball mill was employed to reduce the particle size of TiO2 powders to nanoscale and silver loading to TiO2 powders. Silver nitrate was used as silver source to obtain about 1% Ag load. Slurry taken from ball mill was separated by centrifugal separator into nano and micro sols. Separated nanosol was taken into the furnace to be dried...
Production of boric acid from ulexite (Boronatrocalcite) using hydrochloric acid.
Okay, Gürol; Department of Chemistry (1973)
Production of Hydrogen Storage Alloys via Decrepitation Treatment
Aydınlı, Alptekin; Öztürk, Tayfur (2012-06-26)
Production of nano alumoxane from aluminum hydroxide
Sezgiker, Korhan; Gündüz, Güngör; Department of Chemical Engineering (2010)
Alumina (Al2O3) is one of the most widely used engineering ceramic. It can be used in a wide range of applications like electrical/thermal insulation, wear resistance, structural refractories, cutting tools, abrasives, catalyst carriers and coatings. A traditional ceramic process has several steps (i.e. powder synthesis and processing, shape forming, drying, organic burnout and densification). Accessing powders with sizes in the range of a couple of micrometers down to several tens of nanometers is consider...
Citation Formats
M. Dayıoğlu, “Production of tungsten metal powder from APT by hydrogen reduction.,” Middle East Technical University, 1985.
METU IIS - Integrated Information Service open@metu.edu.tr