Adhesion of thin films.

Date

1986

Author

Karaarslan, M. Faik

Metadata

Show full item record

Item Usage Stats

71
views

0
downloads

URI

https://hdl.handle.net/11511/11088

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Adhesion of thin films Özenbas, M.; Tan, C. (Elsevier BV, 1986-12) The periodic cracking technique for determining the work of adhesion of thin metallic films was applied to two different substrate systems which were metallic substrates (Al, Cu and steel sheet) and a polymeric substrate (ABS, acrylonitrile butadiene styrene). The original model assumes elastic behaviour of the composite and is insufficient for such an application since the substrates exhibit plastic deformation before failure takes place. The model, however, is quite sufficient for obtaining relative magni...
Adhesion of an HTPB-IPDI-based liner elastomer to composite matrix and metal case Haska, SB; Bayramli, E; Pekel, F; Özkar, Saim (1997-06-20) Adhesional characteristics of an elastomeric liner composition toward a highly filled composite matrix and metal case were investigated. The system is composed of an excess isocyanate functionality in the elastomer compared to an excess hydroxyl functionality in the composite matrix. Both phases essentially contain the same binder (HTPB) and curing agent (IPDI). A bifunctional aziridine (MAPO) is used as a bond (adhesion) promoter. The effects of the R value, triol/diol ratio, and MAPO concentration on the ...
Adhesion between poly (ethylene terephthalate) and polyethylene Durgun, Hande; Bayram, Göknur; Department of Chemical Engineering (2003)
Self organization of conducting polymers on graphene and graphene oxide surfaces Haciefendioglu, Tugba; Yıldırım, Erol (2021-08-22)
Microfabrication of PDLLA scaffolds Carletti, E.; Endoğan Tanır, Tuğba; Hasırcı, Nesrin; Hasırcı, Vasıf Nejat; Maniglio, D.; Motta, A.; Migliaresi, C. (2011-07-01) This study aimed to comprehend the potentialities of the microfabrication to produce tissue-engineering scaffolds. Structures presenting homogeneously distributed pores of size 100 and 200 mu m were fabricated through layer-by-layer deposition of filaments of poly(D,L-lactic acid) (PDLLA) prepared from dichloromethane/dhnethylformamide solutions. Rheological tests on the solution and molecular weight distributions of PDLLA, solvent cast films and microfabricated scaffolds were performed to determine which m...

Citation Formats

M. F. Karaarslan, “Adhesion of thin films.,” Middle East Technical University, 1986.