Adhesion between poly (ethylene terephthalate) and polyethylene

Download
143453.pdf
2003
Durgun, Hande
Show full item record
79
views
0
downloads
Polyethylene, Epoxy resins
https://hdl.handle.net/11511/13685
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Synthesis and characterization of mechanical, thermal and flammability properties of epoxy based nanocomposites
Kop, Erhan; Yılmazer, Ülkü; Department of Chemical Engineering (2007)
Polymer-clay nanocomposites have received a lot of attention because of outstanding improvements in properties when compared with neat polymeric materials. The aim of this study was to prepare epoxy-clay nanocomposites by mixing organically modified montmorillonite with an epoxy resin and to investigate the effects of clay content on the mechanical, thermal and flammability properties of the resultant nanocomposites. The production of the epoxy-clay nanocomposites was accomplished by in-situ polymerization....
Electrochemically obtained insulating and conducting polymers and composites of acrylonitrile
Yılmaz (Yurttaş), Berrin; Akbulut, Ural; Toppare, Levent; Department of Chemistry (1996)
Ternary nanocomposites of low density, high density and linear low density polyethylenes with the compatibilizers E-MA-GMA and E-BA-MAh
Işık Coşkunses, Fatma; Yılmazer, Ülkü; Department of Chemical Engineering (2011)
The effects of polyethylene, (PE), type, compatibilizer type and organoclay type on the morphology, rheological, thermal, and mechanical properties of ternary low density polyethylene (LDPE), high density polyethylene (HDPE), and linear low density polyethylene (LLDPE), matrix nanocomposites were investigated in this study. Ethylene – Methyl acrylate – Glycidyl methacrylate terpolymer (E-MAGMA) and Ethylene – Butyl acrylate- Maleic anhydrate terpolymer (E-BA-MAH) were used as the compatibilizers. The organo...
Water dispersed epoxy resin for surface coatings
Şen, Evrim; Gündüz, Güngör; Aras, Leyla; Department of Chemical Engineering (2003)
In this research water dispersed epoxy varnishes were produced by reacting solid epoxy resin with ethylene diamine (EDA) and maleinized fatty acids of linseed oil. Maleinized fatty acid (MFA) was produced by the maleinization process, in which, fatty acid and maleic anhydride were reacted under nitrogen atmosphere. Maleinization was performed in order to insert hydrophilic groups to the fatty acid chains, which were then inserted to the backbone of the epoxy resin. This was done to give water dispersibility...
Ter blend of poly(ethylene terephthalate), polypropylene and low density polyethylene
Doğan, Erkan; Tinçer, Teoman; Department of Polymer Science and Technology (2003)
Citation Formats
H. Durgun, “Adhesion between poly (ethylene terephthalate) and polyethylene,” M.S. - Master of Science, Middle East Technical University, 2003.
METU IIS - Integrated Information Service open@metu.edu.tr