Application of fracture mechanical approach to study the environmentally assisted cracking of aluminium 5052 in 3 % NaC1

Download

012824.pdf

Date

1991

Author

Khawaja, Khurram Sajjad

Metadata

Show full item record

Item Usage Stats

92
views

0
downloads

URI

https://hdl.handle.net/11511/11137

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Application of spatial h∞ control technique for active vibration control of a smart beam Kircali, Omer Faruk; Yaman, Yavuz; Nalbantoǧlu, Volkan; Şahin, Melin; Karadal, Fatih Mutlu (2007-12-01)
Application of structural modification method to nonlinear vibration analysis of bladed disks Şayin, Burcu; Ciğeroğlu, Ender; Department of Mechanical Engineering (2013) High cycle fatigue failure of turbine blades is one of the most important problems in the design of gas turbine engines; hence, bladed-disk assemblies have been studied extensively for more than half a century. Damping design becomes an important issue in order to attenuate the blade vibration. For bladed-disk systems, friction damping concept is a common strategy to decrease vibration levels. There are different strategies in order to add friction damping to the system: blade-to-blade dampers such as shrou...
Application of spatial H-infinity control technique for active vibration control of a smart beam Kircali, Oemer Faruk; Yaman, Yavuz; Nalbantoglu, Volkan; Şahin, Melin; Karadal, Fatih Mutlu (2007-05-12) This study presents the design and implementation of a spatial H-infinity controller for the active vibration control of a cantilevered smart beam. The smart beam consists of a passive aluminum beam (507x51x2mm) and eight symmetrically surface bonded SensorTech BM500 type PZT (Lead-Zirconate-Titanate) patches (25x20x0.5mm). PZT patches are used as actuators and a laser displacement sensor is used as sensor. The smart beam was analytically modelled by using the assumed-modes method. The model only included t...
Application of spatial h ∞ control technique for active vibration control of a smart beam Ömer Faruk, Kırcalı; Yaman, Yavuz; Volkan, Nalbantoğlu; Şahin, Melin; Fatih Mutlu, Karadal (null; 2007-06-04) This study presents the design and implementation of a spatial H∞ controller for the active vibration control of a cantilevered smart beam. The smart beam consists of a passive aluminum beam (507x51x2mm) and eight symmetrically surface bonded SensorTech BM500 type PZT (Lead-Zirconate-Titanate) patches (25x20x0.5mm). PZT patches are used as actuators and a laser displacement sensor is used as sensor. The smart beam was analytically modelled by using the assumed-modes method. The model only included the first...
Application of photostress method on stress analysis of gear teeth Böncü, Aysel; Bilir, Ömer Gündüz; Department of Mechanical Engineering (1994)

Citation Formats

K. S. Khawaja, “Application of fracture mechanical approach to study the environmentally assisted cracking of aluminium 5052 in 3 % NaC1,” Middle East Technical University, 1991.