Application of spatial h∞ control technique for active vibration control of a smart beam

2007-12-01
Kircali, Omer Faruk
Yaman, Yavuz
Nalbantoǧlu, Volkan
Şahin, Melin
Karadal, Fatih Mutlu

Suggestions

Application of spatial H-infinity control technique for active vibration control of a smart beam
Kircali, Oemer Faruk; Yaman, Yavuz; Nalbantoglu, Volkan; Şahin, Melin; Karadal, Fatih Mutlu (2007-05-12)
This study presents the design and implementation of a spatial H-infinity controller for the active vibration control of a cantilevered smart beam. The smart beam consists of a passive aluminum beam (507x51x2mm) and eight symmetrically surface bonded SensorTech BM500 type PZT (Lead-Zirconate-Titanate) patches (25x20x0.5mm). PZT patches are used as actuators and a laser displacement sensor is used as sensor. The smart beam was analytically modelled by using the assumed-modes method. The model only included t...
Application of spatial h ∞ control technique for active vibration control of a smart beam
Ömer Faruk, Kırcalı; Yaman, Yavuz; Volkan, Nalbantoğlu; Şahin, Melin; Fatih Mutlu, Karadal (null; 2007-06-04)
This study presents the design and implementation of a spatial H∞ controller for the active vibration control of a cantilevered smart beam. The smart beam consists of a passive aluminum beam (507x51x2mm) and eight symmetrically surface bonded SensorTech BM500 type PZT (Lead-Zirconate-Titanate) patches (25x20x0.5mm). PZT patches are used as actuators and a laser displacement sensor is used as sensor. The smart beam was analytically modelled by using the assumed-modes method. The model only included the first...
Application of ultrasonic burning rate measurement method on closed bombs
Mumcu, Berkan; Kurtuluş, Dilek Funda; Arkun, Uğur; Department of Aerospace Engineering (2013)
In this thesis study, detailed information about solid rocket motors and ultrasonic burning rate measurement method is given. An experimental setup is prepared for applying the ultrasonic burning rate measurement method. Before performing the burning tests, some pre-tests are performed for affirming the ultrasonic sensor and obtaining some experimental coefficients. Two different types of propellants, which do not include aluminum, are produced for the burning tests. The first type of the propellants has tw...
Application of structural modification method to nonlinear vibration analysis of bladed disks
Şayin, Burcu; Ciğeroğlu, Ender; Department of Mechanical Engineering (2013)
High cycle fatigue failure of turbine blades is one of the most important problems in the design of gas turbine engines; hence, bladed-disk assemblies have been studied extensively for more than half a century. Damping design becomes an important issue in order to attenuate the blade vibration. For bladed-disk systems, friction damping concept is a common strategy to decrease vibration levels. There are different strategies in order to add friction damping to the system: blade-to-blade dampers such as shrou...
Application of Surface-Enhanced Raman Scattering (SERS) method for genetic analyses
Karabıçak, Seher; Volkan, Mürvet; Kocabıyık, Semra; Department of Chemistry (2011)
Raman spectroscopy offers much better spectral selectivity but its usage has been limited by its poor sensitivity. The discovery of surface-enhanced Raman scattering (SERS) effect, which results in increased sensitivities of up to 108-fold for some compounds, has eliminated this drawback. A new SERS active substrate was developed in this study. Silver nanoparticle-doped polyvinyl alcohol (PVA) coated SERS substrate prepared through chemical and electrochemical reduction of silver particles dispersed in the ...
Citation Formats
O. F. Kircali, Y. Yaman, V. Nalbantoǧlu, M. Şahin, and F. M. Karadal, “Application of spatial h∞ control technique for active vibration control of a smart beam,” 2007, Accessed: 00, 2021. [Online]. Available: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=67649934204&origin=inward.