Performance limiting factors in ATM systems

Download
056503.pdf
1997
Yıldırım, Ercan
Show full item record
54
views
0
downloads
https://hdl.handle.net/11511/11228
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Performance improvement of vlsi circuits with clock scheduling
Kapucu, Kerem; Aşkar, Murat; Department of Electrical and Electronics Engineering (2009)
Clock scheduling is studied to improve the performance of synchronous sequential circuits. The performance improvement covers the optimization of the clock frequency and the peak power consumption, separately. For clock period minimization, cycle stealing method is utilized, in which the redundant cycle time of fast combinational logic is transferred to slower logic by proper clock skew adjustment of registers. The clock scheduling system determines the minimum clock period that a synchronous sequential cir...
Performance Comparison between Concentrated and Distributed Wound IPM Machines used for Field Weakening Applications
Chong, Lester; Dutta, Rukmi; Rahman, M. F. (2011-09-10)
Distributed windings have been the winding of choice in IPM machines over the past decades. However recent studies have shown the benefits of applying concentrated windings in terms of increasing the power density of the machine as well as the field weakening performance. This paper states and addresses issues with the application of concentrated windings and compares its field weakening performance to equally sized IPM machines distributed windings. In this paper the authors show the extent of torque densi...
Performance enhancement of discrete time hysteresis current regulators and comparison with linear current regulators for parallel active filters
Oezkaya, Hasan; Sentuerk, Osman Selcuk; Hava, Ahmet Masum (2007-05-05)
In this work discrete time current regulation methods for three-phase parallel active filters (PAF) are investigated. With emphasis on PAF applications, linear and hysteresis current regulation methods are studied and improvements on the discrete time implementation of the latter type without any additional analog hardware are provided. The dependency of the switching ripple filter (SRF) type on the PAF current regulator (CR) type is considered and design methods provided. A PAF is designed for a three-phas...
Performance Comparison of Single and Dual Polarized MIMO Systems
Soker, Burak; Tuncer, Temel Engin (2013-04-26)
Polarization diversity in a 2x2 MIMO communication system is investigated for Alamouti and spatial multiplexing transmission schemes. Parameters such as cross polar discrimination and correlation coefficients introducing the polarization diversity are included in the channel model. Receive antenna correlation coefficients are generated from a realistic random model. The relative performance of the single and dual polarizations depends significantly on the channel characteristics. Single and dual polarizatio...
Performance comparison of inverter control techniques used for the supply of a linear PM synchronous actuator
Ben Salem, I.; Ouni, L. El Amraoui; Gillon, F.; Benrejeb, M.; Brochet, P. (2011-09-10)
This paper presents performance comparison of three inverter control techniques. These techniques are respectively hysteresis control, MAIM control and direct voltage control (DVC). They are applied for a PM Linear Tubular Synchronous Actuator (PAITI,SA) drive fed, using a three phase voltage source inverter (VSI). This VSI is working with constant switching time intervals as in the standard torque control DTC system.
Citation Formats
E. Yıldırım, “Performance limiting factors in ATM systems,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr