Prediction of glass forming ability in ZR based binary alloys

Download
116201.pdf
2001
Dilsizoğlu, Beril
Show full item record
170
views
0
downloads
https://hdl.handle.net/11511/11517
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Prediction of glass forming ability in TM-based binary alloys
Altınoluk, H. Burcu; Aydınol, M. Kadri; Akdeniz, M. Vedat; Department of Metallurgical and Materials Engineering (2001)
Prediction of Bulk Glass Forming Ability in Zirconium based Multicomponent Alloy Systems
Saltoğlu, İlkay; Mehrabov, Amdulla; Akdeniz, Mahmut Vedat (null; 2005-09-28)
Prediction of Bulk Glass Forming Ability of Fe-Mo- based Alloy Systems
Erdiller, Emrah; Mehrabov, Amdulla; Akdeniz, Mahmut Vedat (null; 2005-09-28)
Prediction of overall shape of sintered alumina compacts
Özkan, Necati (1994-01-01)
The effects of the final aspect ratio on the overall shape of cylindrical sintered compacts, prepared by a uniaxial die pressing technique, are measured and described. An empirical compaction equation, which describes the compaction behaviour of a spray dried AKP-30 alumina powder, is presented The density distribution along the axis of the compacts was predicted by, using an established first-order analysis. From these predicted density distributions, the overall shapes of the sintered compacts were quite ...
Prediction of plastic instability and forming limits in sheet metal forming
Şanay, Berkay; Oral, Süha; Kaftanoğlu, Bilgin; Department of Mechanical Engineering (2010)
The Forming Limit Diagram (FLD) is a widely used concept to represent the formability of thin metallic sheets. In sheet metal forming processes, plastic instability may occur, leading to defective products. In order to manufacture defect free products, the prediction of the forming limits of sheet metals is a very important issue. FLD’s can be obtained by several experimental, empirical and theoretical methods. However, the suitability and the accuracy of these methods for a given material may vary. In this...
Citation Formats
B. Dilsizoğlu, “Prediction of glass forming ability in ZR based binary alloys,” Middle East Technical University, 2001.
METU IIS - Integrated Information Service open@metu.edu.tr