An approximate model for the dynamic analysis of thermoelastic cylindrical shells

Download
1990
Muneeb, Anwar-ul-Haq

Suggestions

A novel method for the vibration reduction of an air vehicle missile launcher
Aksoy, T.; Acar, B.; Özgen, Gökhan Osman (2019-01-01)
An exact solution for the bending of thin and thick cross-ply laminated beams
Khdeir, AA; Reddy, JN (1997-02-01)
The state-space concept in conjunction with the Jordan canonical form is presented to solve the governing equations for the bending of cross-ply laminated composite beams. The classical, first-order, second-order and third-order theories have been used in the analysis. Exact solutions have been developed for symmetric and antisymmetric cross-ply beams with arbitrary boundary conditions subjected to arbitrary loadings. Several sets of numerical results are presented to show the deflected curve of the beam, t...
A Vision Based Approach for Assessing Equine Locomotion and Whole-Body Vibration Induced on a Horse Rider
Tanil, Gozde; Soylu, Reşit (2013-07-05)
Biomechanical systems such as horse locomotion are investigated by using inertial sensor systems composed of accelerometers, gyroscopes and magnetometers, or by optical motion tracking systems. The major difficulty in the inertial sensor systems is the integration process. Furthermore, the signals possess noise that has to be filtered. On the other hand, the motion tracking systems are expensive and mostly adapted to indoor laboratory conditions. Hence, in some studies, horses are trained to walk on treadmi...
A new approach in assessing slurry filterability
Yukseler, Hande; Tosun, İsmail; Yetiş, Ülkü (2007-10-15)
Up to date, sludge filterability has been characterized by the Ruth's classical filtration theory and quantified by the well-known parameter specific cake resistance (SCR). However, the complexity of the actual phenomenon is clearly underestimated by the classical filtration theory and SCR is often not satisfactory in describing filterability. Although many scientific studies were conducted for a better analysis and understanding of the filtration theory, still a practically applicable solution to replace t...
A non-linear mathematical model for dynamic analysis of spur gears including shaft and bearing dynamics
Özgüven, Hasan Nevzat (Elsevier BV, 1991-3)
A six-degree-of-freedom non-linear semi-definite model with time varying mesh stiffness has been developed for the dynamic analysis of spur gears. The model includes a spur gear pair, two shafts, two inertias representing load and prime mover, and bearings. As the shaft and bearing dynamics have also been considered in the model, the effect of lateral-torsional vibration coupling on the dynamics of gears can be studied. In the non-linear model developed several factors such as time varying mesh stiffness an...
Citation Formats
A.-u.-H. Muneeb, “An approximate model for the dynamic analysis of thermoelastic cylindrical shells,” Ph.D. - Doctoral Program, Middle East Technical University, 1990.