Examination of kaolinite-mullite reaction series.

1983
Sonuparlak, Birol
Show full item record
79
views
0
downloads
Kaolinite., Mullite.
https://hdl.handle.net/11511/11762
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Overall shape of sintered alumina compacts
Özkan, Necati (1997-01-01)
The extent of the thermally induced shrinkage during sintering of nominally homogeneous ceramic compacts depends upon the green density; compacts with a low green density shrink more than those with a higher density. Therefore, shape distortions of compacts with variable density during their sintering is inevitable. The overall shapes of various sintered alumina compacts, prepared using different types of alumina agglomerates, is described. The agglomerates were prepared using organic polymer [poly(vinyl al...
Investigation of Acoustic Source Localization algorithm performances for Gunshot Localization on helicopters
Yılmaz, Murat; Günel Kılıç, Banu (2016-06-23)
Self-defense solutions on current aircraft usually handle advanced weapons while most helicopters down or damaged are known to be attacked from ground using rifles or Rocket-Propelled Grenades (RPG). Although there are ground based localization solutions for Small Arms Fire (SAF) attacks, there are only a few implementations of onboard applications. A simple Acoustic Source Localization (ASL) application employs a microphone array for collecting audio signals, so as to locate sound sources using the measure...
STUDY OF CERTAIN PARAMETERS IN LABORATORY-SCALE SMELTING OF SIVRIHISAR LATERITE ORES OF TURKEY
KESKİNKILIÇ, ENDER; Pournaderi, Saeid; Geveci, Ahmet; Topkaya, Yavuz Ali (2012-03-15)
Conventional ferronickel smelting has five main steps: Drying, calcination, prereduction, smelting and refining. In the scope of the current work, smelting experiments were conducted using Sivrihisar laterite ores (1.26% Ni) of Turkey. The ore samples previously subjected to drying, calcination and prereduction stages were smelted in alumina crucibles in a laboratoryscale horizontal tube furnace under argon atmosphere. Smelting experiments were performed at 1500, 1550 and 1600 degrees C. The amount of exces...
Friction identification and compensation of its effects in stabilized platforms
Sincar, Eyyüp; Balkan, Raif Tuna; Platin, Bülent Emre; Department of Mechanical Engineering (2013)
A frequent problem encountered in the stabilization of a dynamic system supported by a moving base is the disturbance rejection associated with moving components. Due to relative motion of adjacent components, the friction induces a destabilizing force from base motion to the stabilized object, which degrades the motion accuracy. Therefore, the compensation of frictional effects is necessary in order to obtain a highly precise stabilization performance, especially, when the stabilized system undergoes low-v...
An investigation on use of colemanite powder as abrasive in abrasive waterjet cutting (AWJC)
Cosansu, Gulay; Cogun, Can (2012-08-01)
In the present study, the cutting performance outputs (surface roughness, surface waviness and kerf taper angle) of colemanite powder as abrasive in abrasive watedet cutting (AWJC) with varying traverse rate and abrasive flow rate were investigated experimentally. The performance outputs were compared to that of garnet which is in common use in industry as abrasive in AWJC industry. A17075, marble, glass, Ti6Al4V and a composite material were selected as sample materials in the experiments. Furthermore, col...
Citation Formats
B. Sonuparlak, “Examination of kaolinite-mullite reaction series.,” Ph.D. - Doctoral Program, Middle East Technical University, 1983.
METU IIS - Integrated Information Service open@metu.edu.tr