The effects of amines on the surface properties of scheelite and calcite.

Download
1988
Hiçyılmaz, Cahit

Suggestions

The influence of thickness/grain size ratio in microforming through crystal plasticity
Bulut, Orhun; Acar, Sadik Sefa; Yalçınkaya, Tuncay (2021-01-01)
Microscale forming operations have become popular due to miniaturisation which focuses on micro scale design and manufacturing of devices, components and parts, e.g. in RF-MEMS. In such processes when the component dimension becomes comparable with the grain size, considerable size effect is observed. Recent experimental studies on micron sized sheet specimens have shown that the ratio between thickness (t) and grain size (d) has a significant influence on the mechanical behavior of materials which cannot b...
An experimental study on the performance of an adsorption cooling system and the numerical analysis of its adsorbent bed
Solmuş, İsmail; Yamalı, Cemil; Kaftanoğlu, Bilgin; Department of Mechanical Engineering (2011)
In this thesis, firstly, the equilibrium adsorption capacity of water on a natural zeolite at several zeolite temperatures and water vapor pressures has been experimentally determined for adsorption and desorption processes. Additionally, the modified Dubinin-Astakhov adsorption equilibrium model has been fitted to experimental data and separate correlations are obtained for adsorption and desorption processes as well as a single correlation to model both processes. Experimental results show that the maximu...
The effect of soluble boron on the burnup at different enrichments and assemblies
Gündüz, Güngör; Ajwah, Yousef (Elsevier BV, 1989-5)
The effect of boron on the optimum burnup was investigated at different assemblies for enriched fuels. As the enrichment increases, an alteration in the assembly type is needed for the optimum specific power. This alteration can be made at lower enrichments due to the presence of boron. The optimum specific power is shifted toward the high enrichment fuels when the assembly number is increased. If a fuel of high enrichment is first burnt in a highly hardened neutron spectrum and later in a softer spectrum t...
The Effects of chromic acid anodizing on fatigue behavior of (AMS4050) 7050 T7451 aluminum alloy
İlhan, Çağrı; Gürbüz, Rıza; Department of Metallurgical and Materials Engineering (2019)
7050 T7451 is a solution heat treated, stress relieved, and overaged aluminum alloy which has extensively used in aerospace industry. Chromic Acid Anodizing (CAA) is a treatment against corrosion by producing aluminum oxide layer (Al2O3) at the surface. Although corrosion resistance is increased by CAA, fatigue life of the material is affected inversely due to CAA process. CAA process consists of pre-treatments (degrease, etching etc.) and anodizing steps which have different effects on fatigue life of the ...
A density functional theory study of catalytic epoxidation of ethylene and propylene
Fellah, Mehmet Ferdi; Önal, Işık; Department of Chemical Engineering (2009)
The reactions which give the products ethylene oxide, vinyl alcohol, vinyl aldehyde and vinyl radical for ethylene oxidation and the reactions which give propylene oxide, propanal, acetone and pi-allyl radical for propylene oxidation were investigated by using Density Functional Theory (DFT) method with B3LYP/LanL2DZ and 6-31g(d,p) basis sets in Gaussian’03 software. Silver and silver oxide were used as catalyst surface cluster models. Surface comparison was made for silver (111), (110) and (100) surfaces. ...
Citation Formats
C. Hiçyılmaz, “The effects of amines on the surface properties of scheelite and calcite.,” Ph.D. - Doctoral Program, Middle East Technical University, 1988.