High temperature creep behaviour of nitrided Fe-V Fe-Ti alloys.

1981
Bor, A. Şakir
Show full item record
87
views
0
downloads
Alloys., Metals
https://hdl.handle.net/11511/11980
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

High temperature microstructural stability and recrystallization mechanisms in 14YWT alloys
Aydoğan Güngör, Eda; Takajo, S.; Vogel, S. C.; Maloy, S. A. (Elsevier BV, 2018-04-01)
In-situ neutron diffraction experiments were performed on room temperature compressed 14YWT nanostructured ferritic alloys at 1100 degrees C and 1150 degrees C to understand their thermally activated static recrystallization mechanisms. Existence of a high density of Y-Ti-O rich nano-oxides ( and {112} texture components during annealing, in contrast to the conventional recrystallization textures in body centered cubic alloys. Furthermore, nano-oxide size, shape, density and distribution are considerably di...
Effect of solidification rate on microstructure and primary carbides of AISI DC 53 cold work tool steel
Cardakh, Ismail Seckin; Kalkanlı, Ali (Springer Science and Business Media LLC, 2019-05-01)
The solidification behavior of AISI DC 53 cold work tool steel was investigated by means of a cooling curve and its first derivative. Copper and sand wedge-shaped molds were used to obtain various solidification rates. To reveal the cooling rate degree during solidification, the secondary dendrite arm spacing of the steel alloy was examined by scanning electron microscopy (SEM). The solidification rates of each section for both wedge steel samples were calculated by means of the secondary dendrite arm spaci...
Low velocity impact characterization of monolithic and laminated AA 2024 plates by drop weight test
Kalay, Yunus Eren; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (2003)
The objective of this study was to investigate the low velocity impact behavior of both monolithic and laminated aluminum alloy plates. For this purpose, a drop-weight test unit was used. The test unit included the free fall and impact of an 8 kg hammer with an 8 mm punching rod from 0.5 m to 4 m. The relationship between the change in static mechanical properties (hardness, ultimate tensile strength, yield strength, strain hardening rate) and low velocity impact behavior of monolithic aluminum plates were ...
Enhanced reactivity in a heterogeneous oxido-peroxido molybdenum(VI) complex of salicylidene 2-picoloyl hydrazone in catalytic epoxidation of olefins
Moradi-Shoeili, Zeinab; Zare, Maryam; AKBAYRAK, SERDAR; Özkar, Saim (Springer Science and Business Media LLC, 2017-05-01)
A molybdenum(VI) oxido-diperoxido complex of salicylidene 2-picoloyl hydrazine (sal-phz) was synthesized and successfully grafted onto chloro-functionalised Fe3O4 nanoparticles. The resulting heterogeneous and magnetically recoverable nanoscale catalyst MoO3(sal-phz)/Fe3O4 was characterized by physicochemical and spectroscopic techniques. The activity of this heterogeneous catalyst for the oxidation of olefins to corresponding epoxides was efficiently increased by increasing the reaction temperature up to 9...
THERMODYNAMICS AND STRUCTURE OF LIQUID BINARY-ALLOYS CALCULATED USING AN ANALYTIC PAIR POTENTIAL
DALGIC, SS; DALGIC, S; DERELI, G; Tomak, Mehmet (1994-07-01)
Analytic pair potentials proposed by Pettifor and Ward are developed using the Heine-Abarenkov pseudopotential for Li-Na, Na-K, and Na-Cs liquid binary alloys. The corresponding partial structure factors are calculated using the random-phase approximation. The calculated thermodynamic and structural properties using this real-space formalism are in good agreement with experiments.
Citation Formats
A. Ş. Bor, “High temperature creep behaviour of nitrided Fe-V Fe-Ti alloys.,” Ph.D. - Doctoral Program, Middle East Technical University, 1981.
METU IIS - Integrated Information Service open@metu.edu.tr