Fatigue behavior of aluminum matrix SiC particulate reinforced composites

Download
116285.pdf
2001
Boylu, Kadir Süha
Show full item record
157
views
0
downloads
https://hdl.handle.net/11511/12229
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Fatigue performance of PVA fibre reinforced cementitious composite overlays
Aleessa Alam, Burhan; Yaman, İsmail Özgür (2019-07-31)
Pavement maintenance and rehabilitation is as much important as the construction work itself. In this scope, applying the correct and efficient repair method is highly critical for economic and technical reasons. Depending on the damage level, many alternative repair methods exist. Using an overlay is one common method, where a new layer can be directly applied over or replace the top part of an existing pavement. This overlay can be made from asphalt or concrete as well. With the advances in the concrete t...
Fatigue performance of engineered cementitious composites
Aleessa Alam, Burhan; Yaman, İsmail Özgür; Department of Civil Engineering (2016)
The maintenance and rehabilitation of a pavement during its service life is as much important as the construction works of this pavement. In this scope, applying the correct and efficient repair method is highly critical for economic and technical reasons. Depending on the damage level of the pavement, there are many different methods that can be used to repair the pavement. The use of an overlay is one of the most common methods, where a new layer can be applied directly over or replace the top part of an ...
Fatigue Behavior of Welded API 5L X70 Steel Used in Pipelines
Turhan, Sermin Ozlem; Motameni, Ali; Gürbüz, Rıza (2020-08-01)
In this study, fatigue failure behavior of welded X70 pipeline steel was investigated by rotating bar bending fatigue tests performed at room temperature.S-Ncurves of base metal, weld and heat-affected zone (HAZ) were plotted. Tension tests, hardness measurements and Charpy V-notched impact tests were carried out for mechanical characterization. Samples were examined with optical microscope and scanning electron microscope (SEM) microstructurally. Fracture surfaces were examined with SEM. In addition to fra...
Fatigue behaviour of filament wound composite tubes under axial loading
Mat, Onur; Kaynak, Cevdet; Department of Metallurgical and Materials Engineering (1999)
Fatigue behavior of TiNi foams processed by the magnesium space holder technique
Nakas, G. Ipek; Dericioğlu, Arcan Fehmi; Bor, Sakir (Elsevier BV, 2011-11-01)
While the wide range of applications of TiNi alloys makes them highly appealing due to their shape memory and superelasticity properties, the production of TiNi in the porous form further enlarges their application fields. Porous TiNi alloys have been studied extensively for biomedical applications since their elastic modulus is similar to that of bone. Accordingly, TiNi foams have been widely characterized in terms of their various mechanical properties; however, their fatigue properties have not been well...
Citation Formats
K. S. Boylu, “Fatigue behavior of aluminum matrix SiC particulate reinforced composites,” Middle East Technical University, 2001.
METU IIS - Integrated Information Service open@metu.edu.tr