Construction of double discharge pulsed electron beam generator and its applications

Download
116560.pdf
2001
Göktaş, Hilal
Show full item record
121
views
0
downloads
Electron beams., Glow discharges., Electric discharges.
https://hdl.handle.net/11511/12422
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Improvement of computational software for composite curved bridge analysis
Kalaycı, Ahmet Serhat; Topkaya, Cem; Department of Civil Engineering (2005)
In highway bridge construction, composite curved girder bridges are becoming more popular recently. Reduced construction time, long span coverage, economics and aesthetics make them more popular than the other structural systems. Although there exist some methods for the analysis of such systems, each have shortcomings. The use of Finite Element Method (FEM) among these methods is limited except in the academic environments. The use of commercial FEM software packages in the analysis of such systems is cumb...
Development of a safetyinspection methodology for river bridges
Berk, Aysu; Yanmaz, Ali Melih; Department of Civil Engineering (2006)
River bridges get damaged or even collapse because of various reasons, such as development of adverse hydraulic conditions during severe floods, disastrous earthquakes, deficiencies in structural and geotechnical design, material deficiencies, or other unexpected external factors. Failure of service at vital lifelines, bridges, can lead to loss of several lives and properties, traffic disruption, and/or deficiencies in daily usage. Existing structures should be monitored periodically for decision-making and...
Quantitative approach to rapid seismic evaluation of slab-on-girder steel highway bridges
Dicleli, Murat (1996-01-01)
A quantitative approach follows for developing a methodology for the rapid seismic evaluation and ranking of slab-on-girder steel highway bridges. In the development of this methodology, analytical expressions are introduced to calculate the seismically induced forces and displacements in bridge components, first assuming that damage to bearings is not acceptable and then removing this constraint. In the latter case, the superstructure is assumed to become unrestrained and slide on its supports. The seismic...
Structural Identification Analytical Aspects
Aktan, Emin; Necati, Çatbaş; Türer, Ahmet; Zongfen, Zhang (1998-07-01)
Analytical aspects of structural identification are discussed considering different types of models, different model calibration spaces, and different types and amounts of experimental information. Three-dimensional finite element models and 2D grid models of an operating highway bridge are developed. The models were calibrated by taking advantage of an extensive database of experimental information accumulated from the bridge. Different types of models of varying sizes permit comparison of automated optimi...
FATIGUE-BASED METHODOLOGY FOR MANAGING IMPACT OF HEAVY-PERMIT TRUCKS ON STEEL HIGHWAY BRIDGES
Dicleli, Murat (1995-11-01)
Currently, in many areas of North America, special permits are issued to extra heavy vehicles without a detailed evaluation of individual components, considering only the ultimate capacity of the bridge inventory as a whole. Based on this, a large number of special permits have been issued to extra heavy vehicles. In this perspective, the ultimate and cumulative effect of such overloads on steel bridge components is studied. It is found that steel bridge members have adequate ultimate capacity to accommodat...
Citation Formats
H. Göktaş, “Construction of double discharge pulsed electron beam generator and its applications,” Ph.D. - Doctoral Program, Middle East Technical University, 2001.
METU IIS - Integrated Information Service open@metu.edu.tr