Design and implementation of a microcontroller based radio modem

Download
068421.pdf
1997
Muşabak, Cem
Show full item record
258
views
0
downloads
https://hdl.handle.net/11511/1516
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design and implementation of a swith mode arc welding system
Yıldırım, Fatih; Hızal, Mirzahan; Department of Electrical and Electronics Engineering (1997)
Design and implementation of a 200w microinverter for grid connected photovoltaic energy conversion system
Kavurucu, Semih; Hava, Ahmet Masum; Department of Electrical and Electronics Engineering (2014)
As one type of the grid-connected photovoltaic energy conversion systems, micro-inverters (MI, also known as Module Integrated Inverters, MII) are typically designed for residential applications with energy capacities of 3-5 kW and less, in order to provide PV module level energy generation, plug-N-play operation, minimization of the shading effects occurring on the PV module, and flexibility of installation. For the micro-inverter system which can be designed employing variety of topologies, interleaving f...
Design and implementation of an annular acoustic levitation system
Kandemir, Mehmet Hakan; Çalışkan, Mehmet; Department of Mechanical Engineering (2014)
In standing wave acoustic levitation technique, a standing wave is obtained between a source and a reflector. Particles can be attracted towards pressure nodes in standing waves owing to the spring action. Hence, particles can be suspended in air. This operation can be performed on continuous structures as well as in several numbers of axes. In this study an annular acoustic levitation set-up is designed and built. The set-up consists of two langevin type piezoelectric transducers, two waveguides, an annula...
Design and implementation of A MEMS based gravimetric detector for cytometry applications
Bayraktar, Ekrem; Bayraktar, Ekrem; Department of Electrical and Electronics Engineering (2010)
This thesis reports design and implementation of a MEMS based gravimetric resonator for cytometry applications. There are mainly two objectives of this thesis; to enable in-flow analysis and to perform closed loop operation that does not require any additional processing or equipment. A novel MEMS based resonator with in-flow capabilities is proposed for detection of agents inside micro channels. High resolution of mass detection inside micro channels is planned to be succeeded with lateral motion in the mi...
Design and implementation of A PC based test equipment
Alganatay, Gökhan; Bulut, Mete; Department of Electrical and Electronics Engineering (1991)
Citation Formats
C. Muşabak, “Design and implementation of a microcontroller based radio modem,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr