Development of a computer based monitoring system and its usage for power shovels' monitoring

Download
068330.pdf
1997
Hindistan, Mehmet Ali
Show full item record
59
views
119
downloads
Excavation., Rock excavation., Power shovels.
https://hdl.handle.net/11511/1547
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Development of supercapacitors with one dimensional nanomaterials
Yüksel, Recep; Ünalan, Hüsnü Emrah; Çırpan, Ali; Department of Micro and Nanotechnology (2016)
For an ultimate victory of solar energy over polluting fossil fuels, we need to decrease the cost of electricity generated from the sun. The technology based on photovoltaic (PV) solar cell is offering the most promising alternative in this energy conversion. However, this can be possible only if we can reduce the cost of solar cell fabrication and/or increase the conversion efficiency. In order to increase the performance/cost ratio of solar cells, new approaches reducing optical and electrical losses are ...
Development of hole transport transparent conductive electrodes for n-type crystalline silicon solar cells
Akdemir, Ozan; Bek, Alpan; İmer, Muhsine Bilge; Department of Micro and Nanotechnology (2018)
Conventional transparent conductive electrodes (TCEs) used in crystal silicon (c-Si) solar cells are commonly made of indium tin oxide (ITO) which provides low sheet resistance and high transparency. However, due to indium scarcity, ITO layers increase the fabrication cost; thus, alternative TCEs, such as fluorine-doped tin oxide (FTO), zinc oxide (ZnO), metal nanowires and Oxide/Metal/Oxide (OMO) multilayers, are being investigated. Conventional solar cells also make use of doped layers, to create the junc...
A Methodology for lining and design of circular mine shafts in different rock masses
Güler, Erdoğan; Öztürk, Hasan; Department of Mining Engineering (2013)
The objective of this thesis is to predict lining thickness inside circular mine shafts. A numerical study with different rock mass strengths and different in-situ non-hydrostatic stresses are carried out in 2D shaft section models to predict pressures that develop on lining support. An iterative process of applying support pressure until observing no failure zone around shaft is used to simulate lining support pressure for each individual model. Later, regression and fuzzy logic analyses are carried out to...
Development of a remotely-controlled road header robot
Entezari, Ramin; Demirel, Nuray; Department of Mining Engineering (2014)
A road header is a mechanized excavating equipment utilized widely in tunnel construction and underground mining. It is composed of a boom-mounted rotating cutting head, a loading device, a conveyor, and a crawler travelling track to move the entire machine forward and backward. The productivity and performance of the road header is directly affected by the operator efficiency. Besides that road headers are usually operated in deep excavations and hazardous underground mine environments. Therefore, developm...
Fabrication of thin crystalline silicon solar cells with advanced light trapping
Hadibrata, Wisnu; Yerci, Selçuk; Turan, Raşit; Department of Micro and Nanotechnology (2017)
Thin crystalline silicon (c-Si) solar cells with thickness in the order of few tens of microns offer many attractive applications, such as, electronic wearables, space probes and satellites thanks to their flexibility and light-weight character. However, reducing the thickness of active layer of silicon solar cells leads to poor light absorption within the silicon layer, especially in the near infrared region of the solar spectrum. The poor absorption becomes problematic for thin c-Si solar cells as it caus...
Citation Formats
M. A. Hindistan, “Development of a computer based monitoring system and its usage for power shovels’ monitoring,” Ph.D. - Doctoral Program, Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr