Receiver system analysis, design and implementation for the dect system

Download
068710.pdf
1997
Erciyes, Salih
Show full item record
106
views
0
downloads
https://hdl.handle.net/11511/1604
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Antenna array feed network topology determination with frequency bandwidth considerations
Demir, Şimşek (2003-09-01)
Frequency bandwidths of feed network topologies are discussed. Focus is on the impedance match and comments are for phase distribution. Analysis indicates an optimum sub array size for wideband operation of the feed structure when there are practical limitations on realizable characteristic impedances.
Imagery intelligence technology foresight and modeling of mobile applications in the defense industry
Bilge, Başak; Çakır, Serhat; Department of Science and Technology Policy Studies (2018)
Identifying the threats and impacts of an operation field requires continuous planning and emphasizes the importance of intelligence. With the development of electronic systems that support the military decision-making process increases in number, today long- time and high- risk discovery and surveillance operations are performed faster and safer. Therefore, developing technology policies to augment defense- technology research is a crucial step. Reorganization movements, management measures and operational...
Broadband microwave diode mixer design and implementation
Koç, Emrah; Demir, Şimşek; Department of Electrical and Electronics Engineering (2016)
Mixers play a critical role in design and development of wireless communication systems. Demanding requirements of the mixers are improvements in conversion efficiency, bandwidth, cost, and linearity. Schottky barrier diodes attract mixer designers due to their favorable characteristics leading to wide bandwidth, low-cost, and high efficient designs. This thesis demonstrates the design and implementation of two passive mixing circuits using Schottky barrier diodes at microwave frequencies. The first circuit...
Radar performance analysis approaches for the evaluation of radar systems
Yener, Ümit; Kuzuoğlu, Mustafa; Department of Electrical and Electronics Engineering (2018)
In this thesis study, some approaches are proposed for radar performance analysis. It turns out that average power and antenna aperture area (equivalently, antenna gain) are the most important parameters for the assessment or comparison of radar systems. Search and track load concepts and the utilization trade between search and tracking tasks in multifunction radars are also presented. For long distance search / tracking tasks, performance of a two-radar system is analyzed, and it is shown that cross range...
Satellite attitude determination based on GPS carrier phase measurements
Özten, Evrim; Tekinalp, Ozan; Department of Aerospace Engineering (2013)
With the developments in the GPS receiver technology, GPS receivers have been preferable equipments also for the space applications. In the early eighties, they have been used only for position, velocity and time determination. With the further improvements, it has been proven that they can provide not only the positioning information, but also attitude knowledge with the accuracy less than 1 degree. In this thesis, an estimation algorithm is developed in the MATLAB Simulink environment for the attitude det...
Citation Formats
S. Erciyes, “Receiver system analysis, design and implementation for the dect system,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr