Mechanical and tool databases with automatic tool selection module for a desktop turning CAD/CAM package

Download
075667.pdf
1998
Öztürk, Ferruh
Show full item record
96
views
0
downloads
https://hdl.handle.net/11511/1629
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Mechanical fatique and life estimation analysis of printed circuit board components
Genç, Cem; Ünlüsoy, Yavuz Samim; Department of Mechanical Engineering (2006)
In this thesis, vibration induced fatigue life analysis of axial leaded Tantalum & Aluminum capacitors, PDIP and SM capacitors mounted on the printed circuit boards are performed. This approach requires the finite element model, material properties and dynamic characteristics of the PCB. The young modulus of the PCB material is obtained from 3 point bending tests, resonance frequencies are obtained from modal tests and transmissibility’s of the PCB are obtained from transmissibility tests which are used as ...
MECHANICAL PROPERTIES OF 3D PRINTED PARTS MADE OF RECYCLED POLYMERS
Bakır, Ali Alperen; Atik, Resul; Özerinç, Sezer (null; 2019-10-18)
Mechanical performance of composite flat specimens and pressure vessels produced by carbon/epoxy towpreg dry winding
Okten, Yigit Kemal; Kaynak, Cevdet (2022-10-01)
The main purpose of this study is to evaluate the effects of certain processing parameters on the mechanical performance of carbon/epoxy towpreg wound composite structures. For this purpose, composite sample productions and their evaluations were conducted in two steps. In the first step, dry winding of carbon/epoxy towpregs was used to produce flat composite plates. Their evaluation was performed by rheological analysis, interlaminar shear tests, and unidirectional tensile tests. In the second step, towpre...
Mechanical properties, durability, and life-cycle assessment of self-consolidating concrete mixtures made with blended portland cements containing fly ash and limestone powder
Çelik, Kemal; Akgül, Çağla; Gursel, A. Petek; Mehta, P Kumar; Horvath, Arpad; Monteiro, Paulo JM (2015-02-01)
This paper reports the composition and properties of highly flowable self-consolidating concrete (SCC) mixtures made of high proportions of cement replacement materials such as fly ash and pulverized limestone instead of high dosage of a plasticizing agent or viscosity-modifying chemical admixtures. Self-consolidating concrete mixtures are being increasingly used for the construction of highly reinforced complex concrete elements and for massive concrete structures such as dams and thick foundation. In this...
Mechanical reliability analysis using stress-strength interference model and engineering application of reliability: system safety assessment
Sarıgül, Murat Barış; Tarman, Işık Hakan; Department of Mechanical Engineering (2019)
Mechanical reliability is the main concern of this thesis. Reliability prediction of mechanical components is commonly performed via four different techniques which are Component Failure Data Analysis, Empirical Reliability Analysis, Stress-Strength Interference Model and Reliability Database and Handbook Usage. However, Stress Strength Reliability Model, which has a great popularity in these reliability estimation methods in literature, is the main focus of this research. Five methods are used in calculati...
Citation Formats
F. Öztürk, “Mechanical and tool databases with automatic tool selection module for a desktop turning CAD/CAM package,” Middle East Technical University, 1998.
METU IIS - Integrated Information Service open@metu.edu.tr