Effects of titanate coupling agents on low density polyethylene and polypropylene blends and composites

Download

index.pdf

Date

2008

Author

Yılmaz, Gökhun

Metadata

Show full item record

Item Usage Stats

266
views

148
downloads

The objective of this study is to investigate the effects of titanate coupling agents on low density polyethylene (LDPE) and polypropylene (PP) blends and composites in terms of their mechanical and morphological properties. PP and LDPE composites were produced separately in a Brabender internal mixer, and CaCO3 was used as inorganic filler with compositions of 20, 40 and 60 %. PP/LDPE blends were produced in a twin-screw extruder with ratios of 75/25, 50/50 and 25/75. Their composites were prepared with addition of untreated and titanate-treated CaCO3 at 20% filler content. Titanate coupling agent which is appropriate for LDPE, PP and CaCO3 was used to improve the mechanical properties of the blends and composites. For this purpose, “Lica 12” which is a kind of neoalkoxy organotitanate was used. Two forms of Lica 12 were used: powder form (Capow L12) and pellet form (Caps L12). Samples with and without titanate were prepared and then they were injection molded to make specimens for tensile and impact tests. Tensile fracture surfaces of samples were examined by scanning electron microscopy (SEM). Their mechanical and morphological properties were compared with each other to determine the effects of Lica 12. This study showed that Capow L12 improved strain at break and impact strength of PP/CaCO3 composites and PP/LDPE blends containing 75% and 50% PP. The strain at break value of of PP75 composite with 20% titanate-treated filler increased significantly up to 509% which is the highest value among all blends and composites in this study. Capow L12 exhibited its functions in PP matrix much more effectively than in LDPE matrix.

URI

http://etd.lib.metu.edu.tr/upload/12610135/index.pdf
https://hdl.handle.net/11511/18040

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Effect of swaging on microstructure and tensile properties of W-Ni-Fe alloys DURLU, NURİ; Caliskan, N. Kaan; Bor, Sakir (Elsevier BV, 2014-01-01) The objective of this study was to investigate the effect of swaging on the microstructure and tensile properties of high density two phase alloys 90W-7Ni-3Fe and 93W-4.9Ni-2.1Fe. Samples were liquid phase sintered under hydrogen and argon at 1480 degrees C for 30 min and then 15% cold rotary swaged. Measurement of microstructural parameters in the sintered and swaged samples showed that swaging slightly increased tungsten grain size in the longitudinal direction and slightly decreased tungsten grain size i...
Effects of oxidative functionalized and aminosilanized carbon nanotubes on the crystallization behaviour of polyamide-6 nanocomposites Kaynak, Cevdet (2014-04-01) The purpose of this study is to investigate effects of oxidative functionalized and aminosilanized carbon nanotubes on the (1) isothermal and (2) non-isothermal crystallization kinetics of polyamide-6 by DSC analyses, and (3) crystal structure of injection molded specimens by XRD analyses. Nanocomposites were compounded by using melt mixing technique via twin screw extrusion. Due to basically very effective heterogeneous nucleation effect, both increasing amount and surface functionalization of carbon nanot...
Effect of carbon nanotube surface treatment on the morphology, electrical, and mechanical properties of the microfiber-reinforced polyethylene/poly(ethylene terephthalate)/carbon nanotube composites Yesil, Sertan; Bayram, Göknur (2013-01-15) The aim of this study is to investigate the effects of carbon nanotube (CNT) chemical properties, CNT content, and molding temperature on the morphology, electrical, and mechanical properties of the microfiber-reinforced polymer composites. These composites were prepared by extrusion and hot stretching the poly(ethylene terephthalate) (PET)/CNT phase in high density polyethylene (HDPE) matrix. Surfaces of the CNT were modified by purification with strong acid mixture (HNO3 : H2SO4 mixture 1 : 1 by volume) f...
Effects of oxidative functionalization and aminosilanization of carbon nanotubes on the mechanical and thermal properties of polyamide 6 nanocomposites Kaynak, Cevdet (SAGE Publications, 2013-11-13) The focus of this study is to investigate the effects of oxidative functionalized carbon nanotubes (f-CNTs) and aminosilanized carbon nanotubes (s-CNTs) on the mechanical and thermal properties of polyamide 6 nanocomposites. Oxidation of nanotube surfaces was conducted with sulfuric acid/nitric acid mixture and then aminosilanization was carried out with -aminopropyltriethoxysilane. Nanocomposites were compounded by melt mixing technique and shaped by injection molding. Scanning electron microscopy images r...
Effects of glass fiber reinforcement and thermoplastic elastomer blending on the mechanical performance of polylactide Varsavas, S. Deniz; Kaynak, Cevdet (2018-06-01) The purpose of this study was to investigate how optimum mechanical properties (strength-modulus-toughness) of inherently very brittle polylactide (PLA) could be obtained by reinforcing with E-glass fibers (GF) and blending with thermoplastic polyurethane elastomer (TPU). Composites and blends were compounded by twin-screw extruder melt mixing, while specimens were shaped by injection molding. SEM analyses revealed that 15 wt% GF and 10 wt% TPU domains, alone and together, could be uniformly distributed in ...

Citation Formats

G. Yılmaz, “Effects of titanate coupling agents on low density polyethylene and polypropylene blends and composites,” M.S. - Master of Science, Middle East Technical University, 2008.