Computer aided wrinkling analysis of nonaxisymmetric parts in sheet-metal forming

Download

076065.pdf

Date

1998

Author

Şenalp, A. Zafer

Metadata

Show full item record

Item Usage Stats

156
views

0
downloads

Subject Keywords

Metal-work, Sheet-metal work, Metal-work, Finite element method

URI

https://hdl.handle.net/11511/1817

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Computer aided modeling of deep-drawing Piskin, Mehmet Ali; Kaftanoglu, Bilgin (2007-04-04) Deep-drawing operations are performed widely in industrial applications. It is very important for efficiency to achieve parts with no defects. in this work, a finite element method is developed to simulate deep-drawing operation including wrinkling. A four nodded five degree of freedom shell element is formulated. Isotropic elasto-plastic material model with Von Mises yield criterion is used. By using this shell element, the developed code can predict the bending behavior of workpiece besides membrane behav...
Computer-aided deformation analysis of deep-drawing process Darendeliler, Haluk; Kaftanoğlu, Bilgin; Department of Mechanical Engineering (1991)
Finite element modeling of plastic deformation in sheet metal forming Kırımlıoğlu, Sedat Savaş; Kaftanoğlu, Bilgin; Department of Mechanical Engineering (2002)
Discrete tomographic reconstruction methods from the theories of optimization and inverse problems : application in VLSI microchip production Özgür, Osman; Weber, Gerhard Wilhelm; Department of Scientific Computing (2006) Optimization theory is a key technology for inverse problems of reconstruction in science, engineering and economy. Discrete tomography is a modern research field dealing with the reconstruction of finite objects in, e.g., VLSI chip design, where this thesis will focus on. In this work, a framework with its supplementary algorithms and a new problem reformulation are introduced to approximately resolve this NP-hard problem. The framework is modular, so that other reconstruction methods, optimization techniq...
Computer-aided modelling of rolling Savcı, Mehmet Nebi; Kaftanoğlu, Bilgin; Department of Mechanical Engineering (1993)

Citation Formats

A. Z. Şenalp, “Computer aided wrinkling analysis of nonaxisymmetric parts in sheet-metal forming,” Ph.D. - Doctoral Program, Middle East Technical University, 1998.