Active clamped ZVS forward converter with a soft switched synchronous rectifier

Download
075858.pdf
1998
Açık, Çetin Adnan
Show full item record
155
views
0
downloads
https://hdl.handle.net/11511/2086
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Active clamped ZVS forward converter with soft-switched synchronous rectifier for maximum efficiency operation
Acik, A; Cadirci, I (1998-05-22)
An active-clamped, zero-voltage switched forward converter equipped with a soft-switched synchronous rectifier is designed and implemented for some low output voltage applications where maximized efficiency is of utmost importance. The converter efficiency is maximized due to soft-switching of the main, active clamp and the synchronous rectifier MOSFET switches. Experimental results are presented for a converter with a de input voltage of 48V, an output voltage of 5V and a de electronic load up to 10A. The ...
Active clamped ZVS forward converter with soft-switched synchronous rectifier for high efficiency, low output voltage applications
Acik, A; Cadirci, I (Institution of Engineering and Technology (IET), 2003-03-01)
The analysis, design, and implementation of an active clamped ZVS forward converter equipped with a soft-switched synchronous rectifier (ACFC-SR), proposed for high-efficiency low output voltage DC-DC converter applications, is presented. The converter efficiency is maximised due to soft switching of the main, active clamp, synchronous rectifier, and freewheeling MOSFET switches. The operating principles of the ACFC-SR are analysed in detail, and the converter performance is compared with that of alternativ...
Active clamp/reset forward converter with ZCS/ZVS self-driven synchronous rectifier for low output voltage applications
Benlier, Emre; Çadırcı, Işık; Department of Electrical and Electronics Engineering (2000)
Active vibration control of beam and plates by using piezoelectric patch actuators
Lüleci, İbrahim Furkan; Özgüven, Hasan Nevzat; Department of Mechanical Engineering (2013)
Conformal airborne antennas have several advantages compared to externally mounted antennas, and they will play an important role in future aircrafts. However, they are subjected to vibration induced deformations which degrade their electromagnetic performances. With the motivation of suppressing such vibrations, use of active vibration control techniques with piezoelectric actuators is investigated in this study. At first, it is aimed to control the first three bending modes of a cantilever beam. In this s...
Fully Integrated Ultra-Low Voltage DC-DC Converter with Voltage Quadrupling LC Tank Oscillator for Energy Harvesting Applications
Jayaweera, H. M. P. C.; Tabrizi, Hamed Osouli; Muhtaroglu, Ali (2017-12-02)
This paper presents a novel fully integrated ultra-low voltage DC-DC converter and its multi-stage architecture. DC-DC converter frequency has been analytically derived using model analysis and validated in Cadence environment. The proposed voltage quadrupling LC tank oscillator eliminates the buffer circuits utilized in the traditional DC-DC converter, hence improves the performance metrics such as efficiency and output power capacity. The circuit was designed in 180nm standard CMOS process and was simulat...
Citation Formats
Ç. A. Açık, “Active clamped ZVS forward converter with a soft switched synchronous rectifier,” Middle East Technical University, 1998.
METU IIS - Integrated Information Service open@metu.edu.tr