Optimization and application of AFLP molecular marker system on Turkish durum wheat varieties for genetic analyses

Download
1999
İncirli, Aytül

Suggestions

Optimization and field application of a filter pack system for the simultaneous sampling of atmospheric HNO3, NH3 and SO2
Karakas, D; Tuncel, Süleyman Gürdal (1997-06-01)
Optimization and field application of a filter pack system for the simultaneous collection of atmospheric gas-phase HNO3, NH3 and SO2 have been studied. A Teflon prefilter was used to remove particulate matter. Nylon filter, oxalic-acid-treated Whatman 41 filter and sodium-carbonate-treated Whatman 41 filter were used for the collection of HNO3, NH3 and SO2, respectively. For the collection of gas-phase HNO3, nylon filters had better efficiency and capacity as compared to NaCl-impregnated Whatman 41 filters...
OPTIMIZATION AND CHARACTERIZATION OF POLYSILICON FABRICATED BY E-BEAM EVAPORATION FOR PASSIVATING CONTACT SILICON (TOPCON) SOLAR CELLS
Sedani, Salar Habibpur; Turan, Raşit; Ünalan, Hüsnü Emrah; Department of Micro and Nanotechnology (2022-9-05)
Carrier selective passivating contacts have permitted higher conversion efficiencies by decreasing minority carrier recombination velocities at c-Si/metal contact surfaces. Pioneers of photovoltaics (PV) are investigating the remarkable passivation properties of doped polysilicon (poly-Si) layers over silicon oxide (SiOx). Photovoltaic industry experts are predicting a bright future for poly-Si/SiOx structures (TOPCon), as the future of the PV industry. It is possible to minimize the cost of poly-Si layer d...
Optimization of fabrication steps for n-type c-Si solar cells
Orhan, Efe; Ünalan, Hüsnü Emrah; Department of Metallurgical and Materials Engineering (2019)
Crystalline silicon (c-Si) solar cells fabricated on p-type wafers are still dominating the photovoltaic (PV) industry due to advantages in device processing and early focus on p-type cells in the development phase of the industry. Over the years, studies on n-type Czochralski (CZ) substrates have shown that they can be more desirable for the terrestrial applications due to superior material and process advantages such as higher minority carrier lifetime, easier passivation of the surface, absence of light ...
Optimization of Joule-Thomson cryocooler heat exchanger using one-dimensional numerical modeling
Baki, Murat; Okutucu-Özyurt, Tuba; Sert, Cüneyt (Elsevier BV, 2019-12-01)
Steady state operation of the heat exchanger of a Joule-Thomson cryocooler is studied numerically through a one-dimensional model. Argon is used as the working fluid. The developed model is first verified using a cooler configuration that is studied extensively in the literature. Then the model is improved in several ways. A major mistake seen in many of the previous studies is related to the mismatch of the friction coefficient correlation and the conservation of momentum equation of the tube side flow. Wi...
Optimization of an integrated bombardment and agrobacterium infiltration based transformation system for lentil
Çelikkol, Ufuk; Öktem, Hüseyin Avni; Küsmenoğlu, İsmail; Department of Biotechnology (2002)
In this study, the effect of microwounding by particle bombardment and the coupling of vacuum infiltration to Agrobacteritim-mediated transformation, on the efficiency of transient GUS expression of cotyledonary node tissues were investigated. In each experimental set with any Agrobacterium/pia&mid couple, five different treatments were applied to compare the efficiency of integrated bombardment-infiltration system to reference treatments. Throughout the study also the efficiencies of four strains, LBA4404,...
Citation Formats
A. İncirli, “Optimization and application of AFLP molecular marker system on Turkish durum wheat varieties for genetic analyses,” Middle East Technical University, 1999.