Experimental investigation of MRP and PBC in a flexible manufacturing cell with an automated storage and retrieval systems

Download
090677.pdf
1999
Düşmez, Elif
Show full item record
88
views
0
downloads
https://hdl.handle.net/11511/2752
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Experimental Evaluation of Panel-Method-Based Path Planning for eVTOL in A Scaled Urban Environment
Ünal, Zeynep; Bronz, Murat; Yavrucuk, İlkay (2022-01-01)
In this study, previously proposed panel method based path planning for electric vertical take off and landing vehicles in urban environments is tested in a high fidelity simulation environment and with real-life drones in an indoor flight arena. Panel method is a numerical tool, borrowed form fluid dynamics domain, that can generate collision free paths for multiple vehicles in environments with arbitrarily shaped obstacles while guaranteeing obstacle avoidance and convergence to global minima with little ...
Experimental investigation and implementation of a 3D configuration reconstruction algorithm for an object using a single camera image
Acar, Ercan Umut; Platin, Bülent E.; Department of Mechanical Engineering (1995)
Experimental analysis of energy storage device using phase change material integrated with a milk storage system
Nıma, Bonyadı; Somek, Suleyman Kazım; C Cıhan, Ozalevlı; Baker, Derek Keıth; Tarı, İlker (null; 2015-08-12)
Phase change materials (PCMs) have the advantage of storing latent heat at constant temperature and can possess higher energy storage densities in comparison to materials storing sensible heat. Due to these features, latent heat Thermal Energy Storage (TES) devices using PCMs are widely used to store heat in thermal systems. The aim of this study is to experimentally investigate the performance of water PCM in an improved milk storage cooling cycle integrated with a TES device. In this prototype, water is u...
Experimental analysis of an auxiliary air conditioning system used in an armored vehicle
Korkmaz, Alper; Yamalı, Cemil; Bayer, Özgür; Department of Mechanical Engineering (2015)
In this thesis study, the theoretical design phases and experiments are performed about the air conditioning unit for a specific military vehicle, which is designed to be driven by an Auxiliary Power Unit (APU) system. The purpose is to determine the vapor compression refrigeration cycle characteristics under different load conditions on both the evaporator and the condenser as well as observe the particular mass flow rates considering the vapor and liquid phases of the refrigerant. Additionally, all experi...
Experimental investigation of cuttings transport in horizontal wells using aerated drilling fluid
Gül, Sercan; Parlaktuna, Mahmut; Kuru, Ergün; Department of Petroleum and Natural Gas Engineering (2017)
A new experimental approach has been introduced in this thesis for the cuttings transport in horizontal wellbores with the introduction of drag reducers into the aerated drilling fluids. Advanced Flow Loop System (annular test section of 21 ft. long 2.91-in. ID transparent casing and 1.85 in. OD inner drill pipe) in Middle East Technical University Petroleum and Natural Gas Engineering Department have been used for the experiments. The liquid phase has been water and water-PHPA copolymer mixture where the g...
Citation Formats
E. Düşmez, “Experimental investigation of MRP and PBC in a flexible manufacturing cell with an automated storage and retrieval systems,” Middle East Technical University, 1999.
METU IIS - Integrated Information Service open@metu.edu.tr