Comparison of TS 648, load and resistance factor design and EUROCODE 3: Part 1.1 for design fundamentals and structural members

Download

090711.pdf

Date

1999

Author

Kuyucuk, Ali Onur

Metadata

Show full item record

Item Usage Stats

44
views

0
downloads

URI

https://hdl.handle.net/11511/2769

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Comparison of load and resistance factor design and TS 648 for structural members Nuhoğlu, Çagatay; Keyder, Engin; Department of Electrical Engineering (1996)
Comparison of 1-D and 3-D Modeling Methodologies for Flat-Grooved Heat Pipes Gökçe, Gökay; Altunkaş, Oğuz; Çetin, Barbaros; Dursunkaya, Zafer (2019-09-03)
COMPARISON OF ASCE/SEI STANDARD (2010) AND MODAL PUSHOVER BASED GROUND MOTION SCALING PROCEDURES FOR PRE-TENSIONED CONCRETE BRIDGES Özgenoğlu, Müge; Arıcı, Yalın (null; 2017-11-01) The seismic design and evaluation of large bridges is a demanding task owing to the significant size and the structural characteristics of these systems. Although elastic analysis methods are regarded as sufficient for common, uncritical bridges; complex analysis methods such as non-linear time history analysis (NTHA) are often required for non-standard and/or important bridges. The selection of the ground motions that will be used in non-linear time history analysis is a crucial task in this regard as the ...
Comparison of ASCE/SEI standard (2010) and modal pushover based ground motion scaling procedures for pre-tensioned concrete bridges Özgenoğlu, Müge; Arıcı, Yalın; Department of Civil Engineering (2015) The seismic design and evaluation of large bridges is a demanding task owing to the significant size and the structural characteristics of these systems. Although elastic analysis methods are regarded as sufficient for common, uncritical bridges; complex analysis methods such as non-linear time history analysis (NTHA) are often required for non-standard and/or important bridges. The selection of the ground motions that will be used in non-linear time history analysis is a crucial task in this regard as the ...
Comparison of continuous and pulsed pump and treat for mass transfer limited aquifers Aksoy, Ayşegül (2004-01-01)

Citation Formats

A. O. Kuyucuk, “Comparison of TS 648, load and resistance factor design and EUROCODE 3: Part 1.1 for design fundamentals and structural members,” Middle East Technical University, 1999.