Design and analysis of industrial centrifugal compressors

Download
093393.pdf
2000
Toker, Kemal Atılgan
Show full item record
85
views
0
downloads
https://hdl.handle.net/11511/2826
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design and analysis of ultrashort femtosecond laser amplifiers
Doğan, Ersin; Bilikmen, Kadri Sinan; Department of Physics (2006)
This thesis presents a compact femtosecond laser amplifier design for optical preamplifiers and power amplifiers consist of theoretical perspective, simulations to analyze and optimize beam performance. The propagation through optical media is simulated for every optical component such as mirrors and nonlinear crystal separately and suggested realignment of these components required increasing amplifier performance. Finally Gaussian beam propagation and aberration compensation has been conducted.
Design and Analysis of PLLs for Line-connected Converters in Three Phase Systems
Vyawahare, D.; Kose, H.; AYDEMİR, MEHMET TİMUR; Chandorkar, M. C. (2011-09-10)
This paper is concerned with phase locked loop (PLL) structures for use in the control of line connected power electronic converters in three phase systems. Such converters have to operate under conditions in which the power system phase voltages are often unbalanced. The unbalanced and distorted line voltage vector as observed in the stationary reference frame generally has instantaneous rates of change components in the radial as well as in the angular directions. The essential task of a PLL in this conte...
Design and analysis of filament wound composite tubes
Balya, Bora; Parnas, Kemal Levend; Department of Mechanical Engineering (2004)
This thesis is for the investigation of the design and analysis processes of filament wound composite tubes under combined loading. The problem is studied by using a computational tool based on the Finite Element Method (FEM). Filament wound tubes are modeled as multi layered orthotropic tubes. Several analyses are performed on layered orthotropic tubes by using FEM. Results of the FEM are examined in order to investigate characteristics of filament wound tubes under different combined loading conditions. W...
Design and simulation of heat exchangers for the food industry
Tonyalı Karslı, Gökcem; Çekmecelioğlu, Deniz (Elsevier Science, Oxford/Amsterdam , 2022-11-01)
Design and analysis of a high voltage exploding foil initiator for missile systems
Yılmaz, Muhammed Yusuf; Ulaş, Abdullah; Department of Mechanical Engineering (2013)
Increasing insensitivity demands on designing and producing munitions necessitates utilizing primarily insensitive initiation trains specifically in missile systems. Exploding Foil Initiator (EFI) is a high voltage detonator that is used as the initiation elementof rocket motor and warhead initiation trains of modern insensitive missile systems. In this thesis, EFI prototypes are designed and manufactured with the knowledge gained from detailed literature studies. An experimental setup is constructed includ...
Citation Formats
K. A. Toker, “Design and analysis of industrial centrifugal compressors,” Middle East Technical University, 2000.
METU IIS - Integrated Information Service open@metu.edu.tr